1 - 10 of
38 results for
Hardware Troubleshooting for Catalyst 2948G-L3/4908G-L3 Series Switches
This document helps troubleshoot potential hardware issues with the Catalyst 2948G-L3 and the Catalyst 4908G-L3 switches. Both the Catalyst 2948G-L3 and the Catalyst 4908G-L3 are wire-rate Layer 3 (L3) switches. Because both switches share...
30 Aug 2005
This document describes the set-up of an EtherChannel and 802.1Q trunking between Catalyst 2950 and Catalyst 2948G-L3 switches. EtherChannel can be called Fast EtherChannel (FEC) or Gigabit EtherChannel (GEC) depending upon the speed of the interfaces or ports used to form the EtherChannel.
16 Nov 2007
This document provides an index of hardware troubleshooting documents for Cisco products.
20 Oct 2006
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that you are running Catalyst OS (CatOS)...
29 Nov 2007
This document provides a sample configuration for Maximum Transmission Unit (MTU) sizes supported across all of the Cisco Catalyst-series switches on Ethernet-based ports.
24 Mar 2005
This document discusses and provides a sample configuration of Fast EtherChannel (FEC) and 802.1Q trunking, between a Catalyst 2948G-L3 switch that runs Cisco IOS® software and switches that run CatalystOS (all models, including Catalyst 4000, 5000, and 6000 series...
30 Aug 2005
Cisco Catalyst 2960S-24TS-L Switch
09 May 2013
Cisco Catalyst 2960-24TT-L Switch
19 Apr 2013
...2007 Hardware Troubleshooting Hardware Troubleshooting for Catalyst 2948G-L3/4908G-L3 Series Switches 30/Aug...
25 Apr 2005
This document provides basic guidelines to isolate and resolve many common Ethernet auto-negotiation issues. This document provides a general description of auto-negotiation, and explains the procedure to configure and verify auto-negotiation on Catalyst switches that run the Catalyst...
28 Oct 2009