|
|
|
1 - 10 of
20,115 results for
How Does RADIUS Work
|
|
|
|
The Remote Authentication Dial-In User Service (RADIUS) protocol was developed by Livingston Enterprises, Inc., as an access server authentication and accounting protocol. The RADIUS specification RFC 2865 obsoletes RFC 2138. The RADIUS accounting standard RFC 2866 obsoletes RFC...
www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800945cc.shtml
19 Jan 2006
...Control List (ACL) is applied. How can I permit HSRP through an ACL? How does TACACS/RADIUS accounting work with HA routers with HSRP...
References:
17
TAC
|
6
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800a9679.shtml
26 Sep 2012
Point-to-Point Tunneling Protocol (PPTP) is a Layer 2 tunneling protocol which allows a remote client to use a public IP network in order to communicate securely with servers at a private corporate network. PPTP tunnels the IP. PPTP is described in RFC 2637. PPTP support on the PIX Firewall was added...
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml
18 Dec 2007
This document introduces the concept of dynamic VLAN assignment. The document describes how to configure the wireless LAN controller (WLC) and a RADIUS server to assign wireless LAN (WLAN) clients into a specific VLAN dynamically.
References:
13
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml
24 Sep 2012
This document provides a sample configuration for Lightweight Extensible Authentication Protocol (LEAP) authentication of wireless users against the local RADIUS server database on an IOS®-based access point that runs Cisco IOS Software Release 12.2(11)JA or later.
www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c0912.shtml
23 Oct 2007
...information when the server receives a RADIUS record. •Verify RADIUS load balancing server status. Note The test aaa group command does not work with TACACS+. The following example shows how to configure a dnis = dnisvalue...
www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbrdldbl.html
17 Nov 2006
This document explains how to configure a Wireless LAN Controller (WLC) and an Access Control Server ( Cisco Secure ACS) so that the AAA server can authenticate management users on the controller. The document also explains how different management users can receive different privileges...
References:
15
TAC
www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080782507.shtml
05 Nov 2012
This document depicts how to configure a Layer 2 Tunnel Protocol (L2TP) Virtual Private Dialup Network (VPDN) scenario using tunnel attributes downloaded from a RADIUS server. In this example,the L2TP Access Concentrator (LAC) receives the incoming connection and contacts the LAC RADIUS...
www.cisco.com/en/US/products/sw/secursw/ps4911/products_configuration_example09186a00801175d1.shtml
14 May 2009
...Note Two-way authentication does not work when resource pooling is enabled...having to return subsequently to RADIUS for authorization. To initiate...and then (if the RADIUS server does not respond) local authentication...authorization network default group radius local command is used to assign... The following example shows how to configure server-specific...
www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfrad.html
04 Mar 2003
This document demonstrates how to configure the RADIUS server fallback feature with Wireless LAN Controllers (WLCs).
www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008098987e.shtml
30 Apr 2008
|
|
|
|
