|
|
|
1 - 10 of
639 results for
How OSPF Injects a Default Route into a Stub or Totally Stub Area
|
|
|
|
This document shows how Open Shortest Path First (OSPF) injects a default route into a stub or totally stub area.
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9f7.shtml
10 Aug 2005
The OSPF not-so-stubby area (NSSA) feature is described by RFC 1587 and was first introduced in Cisco IOS® Software release 11.2. It is a non-proprietary extension of the existing stub area feature that allows the injection of external routes in a limited...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a88.shtml
10 Aug 2005
The way that Open Shortest Path First (OSPF) generates and advertises default routes (0.0.0.0) varies depending on the type of area the default route is being injected into. In this document, we cover normal areas, stub/totally...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a74.shtml
10 Aug 2005
The Open Shortest Path First (OSPF) protocol, defined in RFC 2328, is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System. This paper examines how OSPF works and how it can be used to design and build today's...
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml
10 Aug 2005
...Route into a Not So Stubby Area How OSPF Injects a Default Route into a Stub or Totally Stub Area How OSPF Propagates External Routes...
www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
This guide shows sample configurations of Open Shortest Path First (OSPF) in different network environments. Specifically, the purpose of this guide is to examine the OSPF database in various environments. The examples fall into the following categories:
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094202.shtml
10 Aug 2005
...So Stubby Area 10/Aug/2005 How OSPF Injects a Default Route into a Stub or Totally Stub Area 10/Aug/2005 How OSPF Propagates...
www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html
25 Apr 2005
...Specifies a cost for the default summary route sent into a stub area or NSSA. ...area. •The default cost is 1. Step...router(config-ospf-ar)# end ...other routers in the stub area or NSSA...This task explains how to configure neighbors...
www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.0/routing/configuration/guide/rc3ospf.html
09 May 2007
Demand circuit options were introduced for Open Shortest Path First (OSPF) in Cisco IOS® Software release 11.2 in response to the OSPF RFC 1793. OSPF sends hellos every 10 seconds and refreshes its link-state advertisements (LSAs) every 30 minutes. These functions maintain neighbor...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a8f.shtml
21 Jul 2005
When an Open Shortest Path First (OSPF) link is configured as demand circuit, OSPF Hellos are suppressed and periodic LSA refreshes are not flooded over the link. These packets bring up the link only when they are exchanged for the first time, or when a change occurs in the information...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481b.shtml
10 Aug 2005
|
|
|
|
