|
|
Recommended Content
Support Toolbox
|
1 - 10 of
48,146 results for
How to Use the net Command
|
|
|
|
This document illustrates the use of the ping and traceroute commands. With the aid of some debug commands, this document captures a more detailed view of how these commands work.
www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6057.shtml
29 Nov 2006
This document explains how to use the xmodem command at the console to download Cisco IOS® software using the ROM monitor (ROMmon).
References:
17
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml
01 Feb 2006
Default routes are used to direct packets addressed to networks not explicitly listed in the routing table. Default routes are invaluable in topologies where learning all the more specific networks is not desirable, as in case of stub networks, or not feasible due to...
References:
7
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094374.shtml
10 Aug 2005
This document explains the step-by-step procedure to use the command-line interface (CLI) in order to upgrade the software image on Cisco Catalyst 3750 series switches that have a multiswitch stack configuration.
www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00804799d7.shtml
28 Oct 2009
The traceroute command allows you to determine the path a packet takes in order to get to a destination from a given source by returning the sequence of hops the packet has traversed. This utility comes with your host operating system (for example,...
www.cisco.com/en/US/tech/tk364/technologies_tech_note09186a00801ae32a.shtml
10 Aug 2005
...set log-settings commands in the CLI, respectively. Caution To avoid filling up the Windows Event Viewer and preventing...Needed box. You can find out how the server maximums are set using the [server] type serverLogs show command, looking at the number (nlogs...Server Agent. On: •Windows: net stop "Network Registrar Local...
www.cisco.com/en/US/docs/net_mgmt/network_registrar/6.1/command/reference/CLI2.html
30 Jun 2007
...2950 and Catalyst 2955 Switch Command Reference OL-10102-01...Catalyst 2950 and 2955 Cisco IOS Commands vtp (global configuration...VLAN media type, you must use version 2. • If you are configuring a Token Ring or Token Ring-NET VLAN media type, you must use...and version configurations in the switch configuration file. Examples This example shows how to rename the filename for VTP configuration...
www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22ea/CR/2950CR.pdf
01 Jun 2007
2673KB
...command. configure memory The configure memory command merges the configuration in Flash memory... The following example shows how to configure the PIX Firewall using a configuration retrieved with TFTP: configure net 10.1.1.1:/tftp/config...
References:
11
TAC
www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html
05 May 2007
...specifies a date and time, in any of the following formats: H:M, H...M:S. •number—Specifies how many of the top processes to list. •[read | write | read-rate...Specifies the metric that is used to sort the list of top process. Requirements Command privilege level: 1 Allowed...
References:
28
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_1_2/cli_ref_712.html
17 Jan 2013
...form of this command to return to the default rate. This example shows how to enable UplinkFast and set the maximum rate to 200 packets per...max-update-rate 200 Router(config)# Command Description show spanning-tree...per-virtual LAN (VLAN) basis, use the spanning-tree vlan command...primary | secondary} [diameter net-diameter [hello-time seconds...
References:
5
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/ios/lanswitch/command/reference/lsw_s2.html
22 Apr 2009
|
|
|
|
