|
|
|
1 - 10 of
891 results for
IP Addressing on the Workgroup Catalyst 1200 Series
|
|
|
|
This document introduces you to the Workgroup Catalyst RMON (Remote Monitoring). The information presented here includescapabilities and limitations, answers to frequently asked questions, solutions to known problems, and descriptions of common error messages. For information...
www.cisco.com/en/US/tech/tk961/technologies_q_and_a_item09186a00800d73a0.shtml
26 Oct 2005
Some links below may open a new browser window () to display the document you selected. IP Addressing on the Workgroup Catalyst 1200 Series 16/Nov/2005
www.cisco.com/en/US/products/hw/switches/ps565/prod_configuration_examples_list.html
25 Apr 2005
This document provides an example for the configuration of Cisco Autonomous IOS® access points to operate in Workgroup Bridge (WGB) mode and connect to a Cisco Unified Wireless network.
References:
19
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080905cea.shtml
21 Apr 2009
...Repeater access points and workgroup bridges cannot associate to...mobility is not supported on repeaters and workgroup bridges. You must use...Release 12.3(2)JA changes the default behavior of access points requesting an IP address from a DHCP server: ...connect a 350, 1130AG, or 1200 series access point with a default...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b32rnja5.html
16 Mar 2011
Enter Description of the document here.
www.cisco.com/en/US/products/hw/switches/ps565/products_tech_note09186a008009422b.shtml
07 Oct 2005
...Repeater access points and workgroup bridges cannot associate to...3 mobility is not supported on repeaters and workgroup bridges. You must use...2)JA1 and later change the default behavior of access points requesting an IP address from a DHCP server...connect a 350, 1130AG, or 1200 series access point with a default...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b34ja1rn.html
16 Mar 2011
...Repeater access points and workgroup bridges cannot associate to...mobility is not supported on repeaters and workgroup bridges. You must use...2)JA1 and later change the default behavior of access points requesting an IP address from a DHCP server: ...connect a 350, 1130AG, or 1200 series access point with a default...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b34ja2rn.html
16 Mar 2011
... •CSCeb52239, CSCec20465—The access point now correctly assigns VLANs to devices connected to a workgroup bridge. •CSCeb60581—The access point now sends the correct...MOTD) banner is configured on the CLI. •CSCeb79465—The... •CSCec07703—Cisco 7920 IP Phones no longer drop calls when associated to 1100 and 1200 series access points. •CSCec12813...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b13JA1.html
12 Jun 2010
...CSCeb52239, CSCec20465—The access point now correctly...VLANs to devices connected to a workgroup bridge. •CSCeb60581—The access point now sends the...now enter the letters in MAC addresses using either upper-case or...MOTD) banner is configured on the CLI. •CSCeb79465... •CSCec07703—Cisco 7920 IP Phones no longer drop calls when associated to 1100 and 1200 series access points. •CSCec12813...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b13JA3.html
12 Jun 2010
...DFS Enabled by Default on 5-GHz Radios in North...2)JA and later change the default behavior of access points requesting an IP address from a DHCP server: •When you connect a 1200 or 1230 series access point with a default...Workaround—Configure no ip igmp snooping on the access point. •CSCsi10705...throughput on dual-radio 1200 series access points is sometimes...CSCsj86643—When you use the a workgroup bridge (WGB) to simulate...
www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_3_8_JEC1rn.html
11 Jun 2010
|
|
|
|
