|
|
|
1 - 10 of
1,187 results for
IPX, IGX, or BPX Card Resets While Burning Firmware
|
|
|
|
...compatible with UXM Firmware Model A...processor cards must be configured...physical card resetting with the following...steps: Step 1 Burn the boot code...in a given BPX 8600 node...in a given IGX 8400 node...when burning firmware failed CSCdm62548...if its back card is configured...service template while upgrading...CSCdm02272 BPX went into...CSCdm24031 Burning old BXM FW...Swerr 706 in IGX feeder ...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...later. All BPX processor cards must be configured...version of CC boot firmware must be installed...physical card resetting with the following...steps: Step 1 Burn the boot code...After runrev IGX hangs when performing...CSCdu50129 Symptom: While cwm coldstart...on 1:1 APS BPX side uncleared...When BXM OC-3 card was downgraded...K. FW was burned on the standby...Use matching firmware versions on...Workaround: Resetting both the active...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
This document describes the Cisco recommended 34 point process for a successful IPX, IGX 8400 Series Switch, or BPX 8600 Series Switch software upgrade.
www.cisco.com/en/US/products/sw/ps2346/ps99/products_tech_note09186a0080094c67.shtml
17 Apr 2009
...any control cards contain less...Card Boot Firmware Requirements...physical card resetting with the following... Step 1 Burn the boot code...in a given BPX 8600 node...in a given IGX 8400 node...CSCdm50251 BPX: Port Real-Time...enhanced BXM card types need...status when burning firmware failed CSCdm62548...IMATM and IGX UXM CSCdm65089...service template while upgrading...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.pdf
1565KB
...switchyred on the BPX in this case...CSCin33357 Symptom: After burn MFW image, the BXM enhanced card went to resetting. Conditions: BXME...CSCdz60041 Symptom: BPX may not be able to...Appendix A—BXM Firmware MFZ Release Notes...LMI version 4 to IGX AAL5 feeder, while it does not support...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...CSCdr13208 Symptom: BXM CD errors while running OAM cells Conditions...None CSCdr13196 Symptom: BPX reports SWERR 105 Conditions: SWERR105 logged while running OAM loopback test Workaround: None reset the BXM card 82 Part Number 78-11020-05...New Features supported in BXM Firmware MDA The following bugs are...
www.cisco.com/en/US/docs/switches/wan/mgx/ses/software/ses_pnni/release/notes/1_12rn.pdf
848KB
...CSCdr13208 Symptom: BXM CD errors while running OAM cells Conditions...None CSCdr13196 Symptom: BPX reports SWERR 105 Conditions: SWERR105 logged while running OAM loopback test Workaround: None reset the BXM card 83 Part Number 78-11020-05...New Features supported in BXM Firmware MDA The following bugs are...
www.cisco.com/en/US/docs/switches/wan/mgx/ses/software/ses_pnni_controller/r1.0.11/release/notes/1_11rn.pdf
859KB
...Access to IGX, BPX, and MGX Networks...Software and Firmware Download and...supported by BPX, IGX, MGX, and...standby NPM card for initiation...is issued to burn the function...software and firmware images from...Preparing the IPX/BPX Switch to Download...Downloading Cisco WAN Card Firmware ...applicable to IGX and BPX switches...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/user/guide/Usergd.pdf
5930KB
...holding down the return key while cc’ed to a service module...Information is not retained on reset. Condition: One time...Software and Service Module Firmware CSCdr05045 Symptom...Softswitch caused FRSM-CT3 cards to goto failed state...no line is added on the BPX side and APS is added...local loop. Workaround: Reset the card. Further Problem Description...Software and Service Module Firmware CSCdr43216 The...CSCdr44024 The MGX and BPX defaults are consistent...CSCdr45284 Symptom: While executing the command...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1125.pdf
1441KB
...holding down the return key while cc’ed to a service module...Information is not retained on reset. Condition: One...Software and Service Module Firmware CSCdr05045 Symptom...Softswitch caused FRSM-CT3 cards to goto failed state...no line is added on the BPX side and APS is added...loop. Workaround: Reset the card. Further Problem Description...Software and Service Module Firmware CSCdr43216 The stand-by...CSCdr44024 The MGX and BPX defaults are consistent...CSCdr45284 Symptom: While executing the command...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1127.pdf
1455KB
|
|
|
|
