|
|
|
1 - 10 of
788 results for
Initial Configurations for OSPF over Non-Broadcast Links
|
|
|
|
On non-broadcast media such as Frame Relay, X.25, ATM, and Switched Multimegabit Data Service (SMDS), OSPF can run in two modes:
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009470d.shtml
29 Dec 2005
On point-to-point links such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP), Open Shortest Path First (OSPF) runs as a point-to-point network type. This network type is enabled by default. This document shows sample configurations for OSPF...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094057.shtml
06 Jul 2007
This document provides sample configurations for Open Shortest Path First (OSPF) over Frame Relay subinterfaces.
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094054.shtml
10 Aug 2005
This document explains a sample configuration for Open Shortest Path First (OSPF) over the broadcast medium, such as Ethernet and Token Ring. The command show ip ospf interface verifies that OSPF runs over all the broadcast media as broadcast network type...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094058.shtml
06 Jul 2007
This Tech Note explains an issue of OSPF routes appearing in the Link State database but not in the routing table in a fully meshed Frame Relay environment. For more scenarios, see Why Are Some OSPF Routes in the Database but Not the Routing Table?
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094051.shtml
29 Dec 2005
...Subinterfaces Initial Configurations for OSPF over Non-Broadcast Links MPLS Basic...Routes? Initial Configurations for OSPF over Non-Broadcast Links IP Addressing...
www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
The Open Shortest Path First (OSPF) protocol, defined in RFC 2328, is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System. This paper examines how OSPF works and how it can be used to design and build today's large and complicated networks.
References:
14
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml
10 Aug 2005
...encapsulation frame-relay ip ospf network point-to-multipoint non-broadcast no ip mroute-cache no keepalive...1 300 no shutdown ! router ospf 1 network 10.0.1.0 0...area 0 The output shown for neighbors in the first configuration is as follows: Router...point-to-point serial link. interface ethernet 0...
www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/configuration/12-4t/iro-cfg.html
01 Nov 2011
This document shows two Open Shortest Path First (OSPF) routers connected in a multi-access network.
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9eb.shtml
10 Aug 2005
...for OSPF over Frame Relay...2005 Initial Configurations for OSPF over Non-Broadcast Links 29/Dec...
www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html
25 Apr 2005
|
|
|
|
