|
|
|
1 - 10 of
7,153 results for
Initial Configurations for OSPF over a Point-to-Point Link
|
|
|
|
On point-to-point links such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP), Open Shortest Path First (OSPF) runs as a point-to-point network type. This network type is enabled by default....
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094057.shtml
06 Jul 2007
This document provides sample configurations for Open Shortest Path First (OSPF) over Frame Relay subinterfaces.
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094054.shtml
10 Aug 2005
On non-broadcast media such as Frame Relay, X.25, ATM, and Switched Multimegabit Data Service (SMDS), OSPF can run in two modes:
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009470d.shtml
29 Dec 2005
The document addresses the most frequently asked questions (FAQ) associated with Open Shortest Path First (OSPF). The document covers OSPF version 2 only. OSPF version 3, introduced in Cisco IOS Software Releases 12.0(24)S, 12.2(18)S, and 12.2(15)T, is used for distributing...
References:
6
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_q_and_a_item09186a0080094704.shtml
14 Jun 2012
The ip unnumbered configuration command allows you to enable IP processing on a serial interface without assigning it an explicit IP address. The IP unnumbered interface can "borrow" the IP address of another interface that is already configured on the router. This conserves network and...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9e0.shtml
19 May 2005
...Reverse Route Injection Initial Configurations for OSPF over a Point-to-Point Link Initial Configurations for OSPF Over...
www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
The Open Shortest Path First (OSPF) protocol, defined in RFC 2328, is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System. This paper examines how OSPF works and how it can be used to design and build today's large and complicated...
References:
14
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml
10 Aug 2005
...02/Feb/2006 Initial Configurations for OSPF over a Point-to-Point Link 06/Jul/2007 Initial Configurations for...
www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html
25 Apr 2005
...fast router was connected to a slower router over a point-to-point link. During flooding, several...router at the same time. OSPF update packets are now automatically...efficiently. There are no configuration tasks for this feature; it occurs automatically...
www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/configuration/12-4t/iro-cfg.html
01 Nov 2011
Demand circuit options were introduced for Open Shortest Path First (OSPF) in Cisco IOS® Software release 11.2 in response to the OSPF RFC 1793. OSPF sends hellos every 10 seconds and refreshes its link-state advertisements (LSAs) every 30 minutes. These functions maintain...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a8f.shtml
21 Jul 2005
|
|
|
|
