|
|
|
1 - 10 of
1,237 results for
Inspection and Cleaning Procedures for Fiber-Optic Connections
|
|
|
|
It is important that every fiber connector be inspected and cleaned prior to mating. This document describes inspection and cleaning processes for fiber optic connections.
www.cisco.com/en/US/tech/tk482/tk876/technologies_white_paper09186a0080254eba.shtml
26 Sep 2006
This document discusses some of the cleaning issues that you encounter when you use compressed air as a method to clean a fiber-optic device.
www.cisco.com/en/US/tech/tk482/tk611/technologies_white_paper09186a00801b08da.shtml
19 Sep 2006
...appropriate fiber optic cables are...complete the connections shown in...Position for each connection...NTP-G115 Clean Fiber Connectors” procedure on page 13-26 for all fiber connections, even new...attaches fiber-optic cables on...
www.cisco.com/en/US/docs/optical/15000r9_0/dwdm/procedure/guide/454d90_procedure.pdf
16846KB
...procedure attaches fiber-optic cables on the DWDM...Tools/Equipment Fiber-optic cables Cisco TransportPlanner Internal Connections Report Prerequisite Procedures NTP-G30 Install...NTP-G115 Clean Fiber Connectors...on page 13-26 for all fiber connections...
www.cisco.com/en/US/docs/optical/15000r9_1/dwdm/procedure/guide/454d91_procedure.pdf
15929KB
...procedure attaches fiber-optic cables on the DWDM...Tools/Equipment Fiber-optic cables Cisco TransportPlanner Internal Connections Report Prerequisite Procedures NTP-G30 Install...NTP-G115 Clean Fiber Connectors...on page 14-31 for all fiber connections...
www.cisco.com/en/US/docs/optical/15000r9_2/dwdm/procedure/guide/454d92_procedure.pdf
18527KB
...Transport Planner Internal Connections Report” task on page 4-82...Verify that the appropriate fiber optic cables are available to complete the connections shown in the Cisco Transport...and Destination Position for each connection, then verify...Complete the “NTP-G115 Clean Fiber Connectors” procedure on page 14-31 for all...
www.cisco.com/en/US/docs/optical/15000r9_2_1/dwdm/procedure/guide/454d921_procedure.pdf
17488KB
...connection procedures. Dirty or damaged fiber-optic connectors...better the connection. The best...the proper cleaning and connection...type A for SC connectors...glass or inspection microscope...Matrix •Inspection and Cleaning Procedures for Fiber-Optic Connections •Installation...
References:
8
TAC
www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_19334.html
16 Sep 2009
...Install Cards and Fiber-Optic Cable" Step5...Kick Plates" procedure. If CRMs are...pan-head screws (8; for latch catches...and Craft Pin Connections" procedure. Stop. You...cable, rated for at least 125-A...appropriate electrical inspection authority or...
www.cisco.com/en/US/products/hw/optical/ps4533/products_installation_and_configuration_guide_chapter09186a00801f6a88.html
08 Nov 2004
...connection procedures. Dirty or damaged fiber-optic connectors...better the connection. The best...the proper cleaning and connection...type A for SC connectors...glass or inspection microscope...connecting the fiber-optic connectors...while you are cleaning the chassis...connectors for the coppoer...distances between connections depend...Matrix •Inspection and Cleaning...
References:
10
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_23144.html
20 Oct 2010
This document provides information about the deployment and troubleshooting of Cisco Small Form-Factor Pluggable (SFP) Transceiver Modules in Cisco Catalyst Switches. Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms....
References:
26
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/products/hw/modules/ps4999/products_tech_note09186a00807a30d6.shtml
29 Aug 2008
|
|
|
|
