|
|
|
1 - 10 of
147 results for
Loopbacks on Feeder Connections (IPX as a Feeder)
|
|
|
|
...transmitting the loopback codes for the...deactivate the loopback. Workaround...problem may not be seen on all (far-end...will display a line as disabled, but you... When performing a switchcc, the following...indicates that a connection with an illegal...fans for the SES feeder for IGX that are...
www.cisco.com/en/US/docs/switches/wan/mgx/ses/software/ses_pnni/release/notes/igxsesrn.html
02 Nov 2007
This document provides configuration information for how to connect two BPX 8600 switches with narrowband trunks. Each BPX 8600 switch has an MGX 8220 Edge Concentrator connected as a feeder shelf. The customer premises equipment (CPE) is connected to the feeder shelf. A...
www.cisco.com/en/US/products/hw/switches/ps525/products_configuration_example09186a008009484c.shtml
04 Oct 2005
...support the IPX switch. Throughout...based upon a series of incremental...40 BPX Feeder VCI Restriction... Display Connection Counts FCS...Trunk and Line Loopback FCS 9.3... Deferred Connection Alarm Generation...LMI/ILMI on Virtual Ports...Oversubscription •Feeder VCI Restriction...to allocate as much bandwidth...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...Service Agent. Feeder elements, such as the IGX feeding into a BPX 8600 routing...as well as the IPX network ID...present information on a per-node...nmsbpx03” appears as follows (shown on multiple lines...by specifying a single MIB...end-to-end connections are comprised...segments: the local feeder element to the...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/12.0.00/user_snmp/guide/12snmp.pdf
9153KB
...after rebuild, bad loopback rebuild" CSCdm19696...override and shift on/off CSCdm36041...Cell Loss on ALM/A VPCs (GW_TYPE...on BPX node due to a tstdelay failure CSCdm46537...it does not shows as program CSCdm62078...remote end is BPX feeder CSCdm63583 DSPCONS -FABIT...remotely looped back connections CSCdm70167 Software...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...Three-segment connections: connection between two feeder nodes: IPX(A/F)-FRP to IPX...MGX 8850 The first connection segment in the string...that AIT endpoint on IPX and BNM endpoint on MGX 8220 are treated as ATM endpoints. Example...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/snmp/guide/mib_tbls.html
03 Nov 2007
...between any two feeder nodes. As shown in Figure...connection a is a three segment...nodes. All connections may not have...used to operate on the svPortTable...svAtmPortTable tables, as well as for creating connections. The svPhysicalToLogicalMapTable...identifying the feeder/shelf. Access...characters svMapSlot IPX BPX 8600 MGX...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/snmp/guide/mib_tbls.pdf
4055KB
...two-segment connections the connection is between a routing node and a feeder, for example BPX...8850 The first connection segment in the string format: Endpoint-A—Endpoint-B...The BNM endpoint on MGX 8220 is treated as an ATM endpoint...svConnSegment2 31 IPX IGX 8400 MGX 8220...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/12.0.00/user_snmp/guide/svcmib.pdf
4847KB
...two-segment connections the connection is between a routing node and a feeder, for example BPX...MGX 8850 The first connection segment in the string format: Endpoint-A—Endpoint-B...The BNM endpoint on MGX 8220 is treated as an ATM endpoint...svConnSegment2 31 IPX IGX 8400 MGX 8220...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/12.0.00/user_snmp/guide/svcmib.html
03 Nov 2007
...nodes. This is due to a switch software limitation...originating and terminating on the same feeder nodes (MGX8220 only), CWM will treat these connections as three segment connections...three segments (two on the same feeder node...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/user/guide/Usergd.pdf
5930KB
|
|
|
|
