|
|
|
1 - 10 of
683 results for
MICA Modem States and Disconnect Reasons
|
|
|
|
This document describes how to interpret the call disconnect reason codes reported by Cisco Modem ISDN channel aggregation (MICA) modems.
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094ebd.shtml
13 Oct 2005
This document describes how to interpret the call disconnect reason codes reported by Cisco NextPort universal digital signal processor (DSP) modules. NextPort is the next generation DSP used by Cisco to implement either voice,data,or fax on a given port. AS5350,AS5400,AS5850 platforms...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094ebb.shtml
05 Feb 2010
This document explains how to interpret Integrated Services Digital Network (ISDN) disconnect cause codes. The ISDN disconnect cause code appears in the debug isdn q931 command output, and indicates the reason for call disconnection.
References:
77
TAC
www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
12 Jul 2005
This document compares the Software Port Entity (SPE) commands withtheir equivalent MICA commands.
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080093c03.shtml
05 Feb 2010
The digital modem network modules significantly enhance the dial access flexibility and scalability of the Cisco 3600 platform series. Each network module supports up to 30 digital modems. The digital modem network modules use either the single or dual T1/E1 network modules to offer...
www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a008009454c.shtml
21 Jun 2005
This document discusses ways to verify the performance of the digital modems at the network access server (NAS) as well as the T1/E1 line connected to the NAS. It will not discuss the performance or configuration of the client side modems. For more information on this subject, refer to...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009478d.shtml
09 Jul 2007
...in the remote modem hanging on to...tells Cisco MICA portware to...Cisco MICA state is seen...timeout, Cisco MICA reports an 0x6008...has its own disconnect reasons. Note...decibel level the modem uses for transmissions...
www.cisco.com/en/US/docs/routers/access/modem/AT/Command/reference/atcmnds.html
06 Apr 2002
Modern analogue modem communications have become very complex. The latest technologies no longer rely on a simple basic layout, but expect the telephone company (Telco) cloud be built on digital technology end-to-end. This has led to a dramatic increase in bandwidth at the cost of increased complexity....
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094eb9.shtml
03 Sep 2006
This document explains how to configure Cisco routers and access servers for external modems connected to asynchronous and AUX ports. It explains how to configure the modem to operate properly when connected. This document addresses connection to a console port, but only with reference...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a008009428b.shtml
29 Sep 2005
...PIAFS calls on Cisco MICA modems. Step 3 Router...show mod op 1/3 Modem(1/3) Operational-Status... Parameter #0 Disconnect Reason Info: (0x0) ...
www.cisco.com/en/US/docs/ios/dial/configuration/guide/dia_piafs_21_external_docbase_0900e4b18060bbbf_4container_external_docbase_0900e4b182dbb9fd.html
05 Feb 2008
|
|
|
|
