|
|
|
1 - 10 of
2,671 results for
MTU Mismatch Problem in IS-IS
|
|
|
|
Intermediate System-to-Intermediate System (IS-IS) hellos are padded to the full maximum transmission unit (MTU) size. The benefit of padding IS-IS Hellos (IIHs) to the full MTU is that it allows for early detection of errors due to transmission problems...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00801e1e2b.shtml
10 Aug 2005
...called Protocol Data Units (PDU in OSI) 16 NW’2000 Paris © 2000, Cisco Systems, Inc. IS-IS Hello PDUs IS-IS Hello PDUs... • IIHs are padded to full MTU size 17 NW’2000 Paris © 2000...Overload Bit • While having problems, a router could set the OL bit...still reachable This may change in the future 113 NW’2000 Paris...guidelines Overload-bit • With IS-IS you can manually set the overload...
www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps6632/prod_presentation0900aecd803115e3.pdf
02 Jan 2008
982KB
...Types and Frame Relay Interfaces IS-IS Route Leaking Overview MTU Mismatch Problem in IS-IS Redistributing Routing Protocols...
www.cisco.com/en/US/tech/tk365/tk381/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
This chapter describes how to configure IS-IS features, including authentication and route redistribution on Cisco Nexus 7000 series switches running Cisco NX-OS Release 5.0(2) and later
www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/unicast/configuration/guide/l3_isis.html
25 Oct 2010
This chapter describes how to configure IS-IS features, including authentication and route redistribution on Cisco Nexus 7000 series switches running Cisco NX-OS Release 5.0(2) and later
www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_isis.html
25 Oct 2010
IS-IS on nexus 7000 for nx-os 4.2, including 4.2(1), 4.2(2) and 4.2(3)
www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/unicast/configuration/guide/l3_isis.html
14 Dec 2009
...Priority—Higher is better. Used in DIS election (in LAN hello PDUs, there is no...point-to-point link). By default, IS-IS hellos are padded to the full maximum transmission unit (MTU) size. The benefit of padding...errors caused by transmission problems with large frames or MTU mismatched on adjacent interfaces. ...
www.cisco.com/en/US/products/ps6599/products_white_paper09186a00800a3e6f.shtml
14 Nov 2006
...Priority—Higher is better. Used in DIS election (in LAN hello PDUs, there is no...point-to-point link). By default, IS-IS hellos are padded to the full maximum transmission unit (MTU) size. The benefit of padding...errors caused by transmission problems with large frames or MTU mismatched on adjacent interfaces. ...
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a00800a3e6f.shtml
14 Nov 2006
This document is intended to help determine why a port or interface experiences problems. This document applies to Catalyst switches that run CatOS Software on the Supervisor or Cisco IOS® System Software on the Supervisor.
References:
113
TAC
|
6
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfd6.shtml
03 Apr 2009
...coded, you may also see this problem. Because FTP file transfers...packets of maximum size, an MTU mismatch problem will almost always cause file transfers to fail in a single direction (gets may...
www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1907.pdf
307KB
|
|
|
|
