|
|
Recommended Content
Support Toolbox
|
1 - 10 of
8,674 results for
NAT Support for Multiple Pools Using Route Maps
|
|
|
|
This document explains how the use of access lists versus route maps changes the functionality of Network Address Translation (NAT). For more information on NAT, see Cisco IOS NAT.
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml
10 Aug 2005
...and Subnet Zero NAT Support for Multiple Pools Using Route Maps Network Address...of Operation NAT Support for Multiple Pools Using Route Maps NAT: Local and...
www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
If you are reading this, you are most likely connected to the Internet and there's a very good chance that you are using Network Address Translation (NAT) right now.
References:
8
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml
29 Mar 2011
This document provides answers to some of the more frequently asked questions about Cisco IOS® Network Address Translation (NAT).
References:
37
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_q_and_a_item09186a00800e523b.shtml
26 Apr 2013
...IP pools? A. NAT IP pools are a range of IP addresses that are allocated for NAT translation as needed. To define a pool, the configuration command is used: ip nat pool <name...configured. Q. How does NAT support multiple pools using route maps? A. Please refer to...
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6640/prod_qas0900aecd801ba55a.html
09 Jul 2007
Cisco IOS Network Address Translation (NAT) software allows access to shared services from multiple MPLS VPNs, even when the devices in the VPNs use IP addresses that overlap. Cisco IOS NAT is VRF-aware and can be configured on provider edge routers within the MPLS network.
www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080b40929.shtml
17 Aug 2010
This document explains configuring Network Address Translation (NAT) on a Cisco router for use in common network scenarios. The target audience of this document is first time NAT users.
References:
30
TAC
|
16
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
16 Mar 2006
...particularly useful for creating a mapped address pool with discontinuous IP address ranges or multiple hosts or subnets. To create...Groups" section. •For static NAT-with-port-translation...Context Mode Guidelines Supported in single and multiple context...Guidelines •Supported in routed and transparent firewall...must specify the real and mapped interfaces; you cannot use any. •In transparent...
References:
33
TAC
www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/nat_rules.html
31 Jan 2011
...particularly useful for creating a mapped address pool with discontinous IP address ranges or multiple hosts or subnets. To create...and Groups" section. For specific guidelines for...configuration section for the NAT type you want to configure...Context Mode Guidelines Supported in single and multiple context...Guidelines •Supported in routed and transparent firewall...must specify the real and mapped interfaces; you cannot use any. •In transparent...
References:
55
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/nat_objects.html
31 Jan 2011
...Protocol Inspection" section for more information about NAT and PAT support. PAT translates multiple real addresses to a single mapped IP address by translating the...real source port number is used for the mapped port. However...1024 have only a small PAT pool that can be used. Each...
www.cisco.com/en/US/docs/security/asa/asa84/asdm64/configuration_guide/nat_82.html
31 Jan 2011
|
|
|
|
