1 - 10 of
11,584 results for
OSPF Design Guide
The Open Shortest Path First (OSPF) protocol, defined in RFC 2328, is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System. This paper examines how OSPF works and how it can be used to design and build today's large and complicated...
10 Aug 2005
...Configuration Management with SNMP OSPF Database Explanation Guide OSPF Design Guide OSPF Overview (PDF - 840 KB) OSPF Redistribution...
09 Oct 2010
IP Routing: OSPF Configuration Guide, Cisco IOS Release 12.4T ...scalability in IGPs such as OSPF. By design, OSPF requires LSAs to be refreshed...
01 Nov 2011
All areas in an Open Shortest Path First (OSPF) autonomous system must be physically connected to the backbone area (Area 0). In some cases, where this is not possible, you can use a virtual link to connect to the backbone through a non-backbone area. You can also use virtual links to connect...
04 Jan 2007
The Open Shortest Path First (OSPF) routing protocol is defined by <a target="_blank" href="http://www.ietf.org/rfc/rfc2328.txt">RFC 2328 OSPF Version 2</a> <img alt="leavingcisco.com" height="18" width="18" src="http://www.cisco.com/images/exit.gif">. The goal of this paper is to provide...
15 Sep 2008
Internetwork Design Guide - This Documentation Has Moved RIP and OSPF Redistribution Download this chapter RIP and OSPF Redistribution Feedback ...page because the Internetwork Design Guide content has moved to DocWiki...
23 Apr 2006
This document describes the behavior of redistributing connected routes into Open Shortest Path First (OSPF). There are two behaviors dependent on which version of Cisco IOS® software you are running.
29 Dec 2005
All areas in an Open Shortest Path First (OSPF) autonomous system must physically connect to the backbone area (area 0). However, in cases where this physical connection is not possible, you can use a virtual link to connect to the backbone through a nonbackbone area. You can also use virtual...
15 Aug 2005
This document explains how a router that runs Open Shortest Path First (OSPF) selects a router ID, in what packets this value is sent, and how to troubleshoot router log messages that report duplicate IDs.
24 Apr 2012
This Tech Note explains an issue of OSPF routes appearing in the Link State database but not in the routing table in a fully meshed Frame Relay environment. For more scenarios, see Why Are Some OSPF Routes in the Database but Not the Routing Table?
29 Dec 2005