|
|
|
1 - 10 of
2,537 results for
OSPF Routers Connected by an Unnumbered Serial Link
|
|
|
|
The ip unnumbered configuration command allows you to enable IP processing on a serial interface without assigning it an explicit IP address. The IP unnumbered interface can "borrow" the IP address of another interface that is already configured on the router. This...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9e0.shtml
19 May 2005
On point-to-point links such as High-Level Data Link Control (HDLC) and Point-to-Point Protocol (PPP), Open Shortest Path First (OSPF) runs as a point-to-point network type. This network type is enabled by default. This document shows sample configurations for OSPF...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094057.shtml
06 Jul 2007
...Connected by a Point-to-Multipoint Link OSPF Routers Connected by an Unnumbered Serial Link OSPF Virtual Link OSPFv3 Virtual...
www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
The Open Shortest Path First (OSPF) protocol, defined in RFC 2328, is an Interior Gateway Protocol used to distribute routing information within a single Autonomous System. This paper examines how OSPF works and how it can be used to design and build today's large and complicated...
References:
14
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml
10 Aug 2005
This guide shows sample configurations of Open Shortest Path First (OSPF) in different network environments. Specifically, the purpose of this guide is to examine the OSPF database in various environments. The examples fall into the following categories:
www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094202.shtml
10 Aug 2005
All areas in an Open Shortest Path First (OSPF) autonomous system must be physically connected to the backbone area (Area 0). In some cases, where this is not possible, you can use a virtual link to connect to the backbone through a non-backbone area. You can also use...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9ee.shtml
04 Jan 2007
...a Point-to-Multipoint Link 10/Aug/2005 OSPF Routers Connected by an Unnumbered Serial Link 19/May/2005 OSPF...
www.cisco.com/en/US/tech/tk365/tech_configuration_examples_list.html
25 Apr 2005
...this default OSPF behavior in an MPLS VPN...configure a sham link between two...edge (PE) routers to connect the sites...A sham link represents an intra-area (unnumbered point-to-point...between PE routers. All other...advertised by Border Gateway...advertised by OSPF. Figure...
www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.3/routing/configuration/guide/b_routing_cg43xasr9k_chapter_0110.html
21 Dec 2012
...this default OSPF behavior in an MPLS VPN...configure a sham link between two...edge (PE) routers to connect the sites...A sham link represents an intra-area (unnumbered point-to-point...between PE routers. All other...advertised by Border Gateway...advertised by OSPF. Figure...
www.cisco.com/en/US/docs/routers/crs/software/crs_r4.3/routing/configuration/guide/b_routing_cg43xcrs_chapter_0110.html
21 Dec 2012
...this default OSPF behavior in an MPLS VPN...configure a sham link between two...edge (PE) routers to connect the sites...A sham link represents an intra-area (unnumbered point-to-point...between PE routers. All other...advertised by Border Gateway...advertised by OSPF. Figure...
www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r4.3/routing/configuration/guide/b_routing_cg43xxr12k_chapter_0110.html
21 Dec 2012
|
|
|
|
