|
|
|
|
|
1 - 10 of
87 results for
Option to Disable CDR File Generation on the PGW 2200 Softswitch
|
|
|
|
...CDE Detail Description The generic interface to the CDR dumper interface carries...writes the record in the CDR file. CDB generation is based on a point in call (PIC). The Cisco PGW 2200 Softswitch predefines several PICs that...
References:
6
TAC
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/billing/guide/r9chap1.html
21 Jul 2010
...file for current logging. The log viewer also has an option for exporting the results of a log file search to a UNIX file. For more information on using the log viewer, see...Log in to the active Cisco PGW 2200 Softswitch. Then enter the following... alm.csv platform.log cdr.bin platform_20010516141831...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/maintenance/guide/r9_Ch8.html
07 Dec 2009
...patch earlier than S13P13. The Multiple Incoming IP Trunks feature modifies a CDR (Originating Trunk Group...4008, as described in Cisco PGW 2200 Softswitch Release 9 Billing Interface...specific trunk group attributes to different inbound sip calls. The following prov-add:ipinmapping...ipinmapping entry. •New data file, ipinmapping.dat, records...sigsvcprop is only effective on the SIP/EISUP sigpath...stands for ipinmapping function disabled. –If sip sigsvcprop ipinscreening...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn973.html
05 Jan 2012
...file for current logging. The log viewer also has an option for exporting the results of a log file search to a UNIX file. For more information on using the log viewer, see...Log in to the active Cisco PGW 2200 Softswitch. Enter the cd /opt/CiscoMGC... alm.csv platform.log cdr.bin platform_20010516141831...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9.8/Maintenance/Guide/r9chap6.html
10 May 2010
...following procedure to locate the software files for Patch 60 and later. Step 1 From the Cisco.com page, select the...Telephony Call Control Cisco PGW 2200 Softswitch Cisco PGW 2200 Software Version...installation script allows you to specify which protocol set(s) are required on your platform. •Only packages...life cycle and you have the option to install only the packages...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn961.html
19 Nov 2009
...parameters/procedures. The following two new mdl files were created for ANSI 2000...CSCec06961) provides a configurable option to set the Calling Party Number Incomplete...values are: 0-(default) (disable function and allow the protocol...To enable this featurette on existing 9.3(2) and 9...UK ISUP featurette (on the PGW 2200) to support sending and receiving...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn932.html
03 Aug 2007
...not apply is chosen from the Carrier Screening field. This option of Do not apply disables Carrier Screening to the calls from this trunk group...drop-down lists. The Cisco PGW 2200 Softswitch uses default values if the...network. For more details on these trunk group parameters...are stored in a separate file, a trunk group file. You...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9.8/Provisioning/Guide/R9GUI.html
06 Oct 2010
...not be documented for all the cases. These test cases...revolving around billing (CDR generation and interpretation) for the most common call flows in... •Check the versions of PGW adjuncts for compatibility...at hand when you are going to upgrade your system. ...transpath group in your group file (located in /etc). All...active and standby Cisco PGW 2200 Softswitch pair before the upgrade...restore the TimesTen replicator on the active and standby pair...
References:
6
TAC
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn981.html
30 Jan 2013
...tables before making changes to the dial plan that references them. •Disable PRI AOC supplementary services for all the trunk groups or sigPaths that...plan that references the data to be changed until all updates...planning for provisioning the AOC Generation for PRI feature, collect the...INITIALTARIFF: For more information on planning the provisioning for...for PRI feature of the Cisco PGW 2200 by performing the procedures...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/feature/module/9.5_1_/FMAocPri.html
03 Aug 2007
...list of caveats for the Cisco PGW 2200 Softswitch, use the "Search for bugs in other...hardware products" section. Enter pgw in the Product Name field...features and components. Use this option to refine your search. You can...returns the list of caveats based on your query. Note You are not...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn941.html
03 Aug 2007
|
|
|
|
|
