1 - 10 of
65 results for
PGW 2200 Softswitch Bearer Capability Not Implemented Cause Value
This document addresses some issues related to the use of the clear channel codec in Cisco voice gateways controlled by a Cisco public switched telephone network (PSTN) Gateway (PGW) 2200. To establish a call in a Signaling System (SS) 7 network, a PGW 2200 requires the voice...
03 Feb 2006
While you create a dial plan and then test it out, there is no way to verify how a call runs through a dial plan on the Cisco PGW 2200. At this time, you need to make a test call and run a full MDL trace on the call. When you look at the traces, they are verbose and complicated to understand....
07 Jun 2005
...components. This value can also be ALL...Blocking a single CIC causes a BLO message...Cisco PGW 2200 Softswitch Release 9 Operations...all transaction capabilities application part...Instructs the Cisco PGW 2200 Softswitch whether to start...Forcefully releases a bearer channel associated...
06 Oct 2010
...the Cisco PGW 2200 Softswitch to set different...media gateway bearer capabilities within the...provisioned TMR value is matched...analyzing the TNS values. For example...the Cisco PGW 2200 Softswitch to set different...media gateway bearer capabilities within the...
08 Oct 2010
...analyzing the TMR value in the IAM or Setup...allow the Cisco PGW 2200 Softswitch to set different media gateway bearer capabilities within the network...provisioned TMR value is matched by the...
07 Sep 2010
...semicolon. The default value is NULL. ...support on the Cisco PGW 2200 Softswitch. Incoming data...cleared with the cause that bearer capability is not available...continues. The Cisco PGW 2200 Softswitch...
12 Jun 2009
...B-digit analysis Cause Pre-analysis...indicating if the bearer capability name. The BCMOD result type dataword1 value indicates the bearer channel characteristics...
04 Aug 2007
...incoming calls. Value range: 0-100...Defines the bearer capability of a trunk...the Cisco PGW 2200 Softswitch can preferentially...specific bearer capability. Prop-1...to occur. Value range: 0...
06 Oct 2010
...example changes the bearer capability name for the routing...retransmission timeout value; range: 2 through...the RUDP window. Value range: 2 through...used by the Cisco PGW 2200 Softswitch to communicate...
06 Oct 2010
...a semicolon. Values: null or the valid...support on the Cisco PGW 2200 Softswitch. Incoming data...cleared with the cause that bearer capability is not available...continues. The Cisco PGW 2200 Softswitch...
23 Jun 2011