|
|
Recommended Content
Support Toolbox
|
1 - 10 of
280 results for
PIX/ASA 7.x and later with Syslog Configuration Example
|
|
|
|
This sample configuration demonstrates how to configure PIX/ASA Security Appliance 7.x with syslog.
References:
127
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml
21 Aug 2007
In most cases, a remote PIX that connects to a central PIX does not use network address translation (NAT). Instead, the remote PIX uses a static outside IP address. In an instance when a central PIX that runs 7.x and later connects to a remote PIX using NAT, it is the same as a...
References:
23
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml
03 May 2007
This document provides a sample configuration for IPsec between a Cisco Adaptive Security Appliance (ASA) 5520 and a Cisco PIX 506E using EasyVPN. The ASA 5520 acts as the EasyVPN server and the PIX 506E acts as the EasyVPN remote client. While this configuration uses an ASA 5520 device...
References:
3
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805c5ad9.shtml
12 Mar 2007
This sample configuration demonstrates an IPsec VPN tunnel through a firewall that performs network address translation (NAT).
References:
6
TAC
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008045a2d2.shtml
26 Sep 2008
This sample configuration demonstrates how to set up the PIX Firewall for access to a mail server located on the Demilitarized Zone (DMZ) network.
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806745b8.shtml
01 Oct 2006
...functionality. For example, with an extended access...appliance-originated traffic. For example, if your syslog server is located...appliance clears the configuration because many commands...add new contexts with new paths for new...the command occurs later in the configuration...ASA with version 7.x and later The...
References:
14
TAC
|
4
Support Community
-
View All
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml
26 Sep 2008
This sample configuration demonstrates how to configure the Cisco Security Appliances (PIX/ASA) with three internal networks. Static routes are used on the routers for simplicity.
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094769.shtml
24 Oct 2008
This document addresses the problem when some web sites are not accessible through a PIX or Adaptive Security Appliance (ASA) that runs 7.0 or later code. The 7.0 release introduces several new security enhancements, one of which is a check for TCP endpoints which adhere to the advertised Maximum...
References:
5
TAC
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804c8b9f.shtml
03 Aug 2011
The failover configuration requires two identical security appliances connected to each other through a dedicated failover link and, optionally, a stateful failover link. The health of the active interfaces and units is monitored to determine if specific failover conditions are met. If those conditions...
References:
237
TAC
|
8
Support Community
-
View All
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml
04 Nov 2009
...context mode. With Active...failover configurations support...PIX/ASA 7.x Active...Configuration Example in order...introduction to the PIX/ASA 7.x Active...failover configuration must...process; for example, you can... On the PIX/ASA Security...license. Units with a Restricted...Appliance with 7.x version and later The...
References:
28
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080834058.shtml
04 Nov 2009
|
|
|
|
