1 - 10 of
775 results for
PPP Authentication Using the ppp chap hostname and ppp authentication chap callin Commands
PPP negotiation involves several steps such as Link Control Protocol (LCP) negotiation, Authentication, and Network Control Protocol (NCP) negotiation. If the two sides cannot agree on the correct parameters, then the connection is terminated. Once the link is...
09 Sep 2005
Point-to-Point Protocol (PPP) authentication issues are one of the most common causes for dialup link failures.
18 Dec 2007
Point-to-Point Protocol (PPP) currently supports two authentication protocols: Password Authentication Protocol (PAP) and Challenge Handshake Authentication Protocol (CHAP). Both are specified in RFC 1334 and are supported on synchronous and asynchronous interfaces.
09 Mar 2005
The Challenge Handshake Authentication Protocol (CHAP) (defined in RFC 1994) verifies the identity of the peer by means of a three-way handshake. These are the general steps performed in CHAP:
09 Sep 2005
This document provides a sample configuration for Point-to-Point Protocol (PPP) Challenge Handshake Authentication Protocol (CHAP)/ Password Authentication Protocol (PAP) Authentication over an IPv6 Serial Link.
05 Jul 2011
...calls only and the username ISPCorp will be sent in all CHAP challenges and...encapsulation ppp ppp authentication chap callin ppp chap hostname ISPCorp Command Description...authentication methods for use on serial interfaces...
28 Mar 2011
This sample configuration shows a Cisco 827 Router configured with two permanent virtual circuits (PVCs) and terminating on a Cisco 6400 Universal Access Concentrator (UAC). The UAC has a single node route processor (NRP) installed. Both PVCs use an interface dialer and have been configured...
23 Nov 2007
In dial-related applications,PPP is the most commonly usedencapsulation type. PPP allows two machines on a point-to-point communicationlink to negotiate various parameters for authentication,compression,and theLayer 3 (L3) protocols,such as IP. A failure in the PPP...
05 Feb 2010
This sample configuration shows a Cisco 1417 Digital Subscriber Line (DSL) Router connecting to a Cisco 6130 Digital Subscriber Line Access Multiplexer (DSLAM) and terminating on a Cisco 6400 Universal Access Concentrator (UAC). The Cisco 1417 has been configured as a Dynamic Host Configuration...
01 Jun 2005
This sample configuration shows a Cisco 1417 Digital Subscriber Line (DSL) Router connecting to a Cisco 6130 Digital Subscriber Line Access Multiplexer (DSLAM) and terminating on a Cisco 6400 Universal Access Concentrator (UAC). The Cisco 1417 has been configured with PPP over ATM (PPPoA).
01 Jun 2005