|
|
|
|
|
1 - 10 of
544 results for
PXM1E Failed State Recovery Procedure
|
|
|
|
...dspcds command, the card state in the display appears as Failed. Step 3 To initialize...Notes for Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX...9, "Switch Operating Procedures." Note After installation...PXM1E-4-155 Cards with PXM1E-8-155 Cards" section...card you are replacing has failed, there is no reason...9, "Switch Operating Procedures." Note After you...returns to its normal standby state. When an AXSM card...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.0/data/configuration/guide/maint.html
03 Aug 2007
...release for the MGX 8850 (PXM1E) switch. Release 3.0...reference to MGX 8830, MGX 8850 (PXM1E and PXM45), and MGX 8950...Bus Path Fault Isolation and Recovery Enhancement SPVC connection...number of connections that are failed, and the number of crankbacks...validate the hardware mastership states on the active and standby...in isolation and recovery procedures: Table 1 Enhancements to...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/30208850.html
02 Nov 2007
...8830, MGX 8850 (PXM45 and PXM1E), and Cisco MGX 8950 Command...8850 (PXM45) and MGX 8850 (PXM1E) switches. Release 3.0...Bus Path Fault Isolation and Recovery Enhancement SPVC connection...number of connections that are failed, and the number of crankbacks...validate the hardware mastership states on the active and standby...in isolation and recovery procedures: Table 1 Enhancements...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/30258xx0.html
03 Nov 2007
...8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830 Feedback...8830, MGX 8850 (PXM45 and PXM1E), and Cisco MGX 8950 Command...Bus Path Fault Isolation and Recovery Enhancement SPVC connection...number of connections that are failed, and the number of crankbacks...validate the hardware mastership states on the active and standby...in isolation and recovery procedures: Table 1 Enhancements...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/30238xx0.html
03 Nov 2007
...CSCeg63729 Headline: SNMP failed for trapmgr table. Node... Conditions: SNMP is failing for trapmgr table. Workaround...exceptions were noticed on PXM1E node. Symptom: Many SSI...Symptom occurs when failure recovery scripts are running on the...standby comes to fully standby state, follow the remaining normal upgrade procedures after a loadrev. Hardware...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.1/data/release/notes/518xx0.html
04 Oct 2007
...95-09:14:08 tRootTask 3 Task failed : scm value = 0 = 0x0 wilco...Display Card Health—PXM45, PXM1E The dspcdhealth command displays...chassis: 1 or 2 None Log: no State: active, standby, init Privilege...PXM.a > dspcdhealth 7 * PXM Failed for the following reasons: * Fail Recovery * Reason Method...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r4/command/reference/7dspabr.html
02 Nov 2007
...95-09:14:08 tRootTask 3 Task failed : scm value = 0 = 0x0 wilco...Display Card Health—PXM45, PXM1E The dspcdhealth command displays...chassis: 1 or 2 None Log: no State: active, standby, init Privilege...PXM.a > dspcdhealth 7 * PXM Failed for the following reasons: * Fail Recovery * Reason Method...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r3/command/reference/7dspabr.html
02 Nov 2007
...For most switch configuration procedures, configure the switch using...cards. On Cisco MGX 8850 (PXM1E/PXM45) and Cisco MGX 8950...line and trunk configuration procedures, you need to modify service...such as PXM or CESM. state The card state is active...control if the active card fails. After you log in, the...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r4/pxm1/configuration/guide/cfgswtch.html
07 Nov 2007
...For most switch configuration procedures, configure the switch using...cards. On Cisco MGX 8850 (PXM1E/PXM45) and Cisco MGX 8950...line and trunk configuration procedures, you need to modify service...such as PXM or CESM. state The card state is active...control if the active card fails. After you log in, the...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.0/data/configuration/guide/cfgswtch.html
03 Aug 2007
...connection fails to route with Last Fail Cause: "Quality of Service...1 Headline: connection fails routing due to wrong util used...Symptom: Pnni link between 2 PXM1E based MGX8850's goes down intermittently...is in "oneWayInside" hello state and the other is in the "attempt...IMA backcard goes down without recovery Hardware: pxm1e-ima CSCeb88172...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/40118x50.html
03 Nov 2007
|
|
|
|
|
