|
|
Recommended Content
Cisco Software CentralGet quotes, place orders, register and manage licenses, and download software, upgrades, and patches. Log in required.
|
1 - 10 of
55 results for
QoS Output Scheduling on Catalyst 6500/6000 Series Switches Running CatOS System Software
|
|
|
|
Output scheduling ensures that important traffic is not dropped in the event of heavy oversubscription. This document discusses all the techniques and algorithms that are involved in output scheduling on Cisco Catalyst 6500/6000 series switches...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801091a5.shtml
13 Apr 2007
The use of output scheduling ensures that important traffic is not dropped in the event of heavy oversubscription. This document discusses all of the techniques and algorithms involved in output scheduling on the Catalyst 6500/6000 switch....
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bf98.shtml
02 Sep 2005
This document provides a brief explanation of common syslog and error messages that you see on Cisco Catalyst 6500/6000 series switches that run Cisco IOS® system software. Use the Output Interpreter Tool if you have an error message...
References:
132
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00801b42bf.shtml
21 Dec 2011
This document examines what happens with regard to the marking and classification of a packet at various stages within the Cisco Catalyst 6500/6000 chassis that runs Cisco IOS® Software. This document describes special cases and restrictions, and it provides short case...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008014a29f.shtml
08 Dec 2005
This document describes troubleshooting hardware and related common issues on Catalyst 6500/6000 switches that run Cisco IOS® system software. Cisco IOS Software refers to the single bundled Cisco IOS image for both the Supervisor Engine...
References:
61
TAC
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a00801751d7.shtml
24 May 2012
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that you are running Catalyst...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a0080094713.shtml
29 Nov 2007
This document addresses frequently asked questions (FAQs) about the Quality of Service (QoS) feature of the Catalyst 6500/6000 with Supervisor 1 (Sup1), Supervisor 1A (Sup1A), Supervisor 2 (Sup2), and Supervisor 720 (Sup720) that run Catalyst OS (CatOS)....
www.cisco.com/en/US/products/hw/switches/ps708/products_qanda_item09186a00804d2e3a.shtml
28 Jul 2006
This document provides sample configurations for IEEE 802.1Q trunking between Catalyst switches running Catalyst OS (CatOS) system software and modular Layer 3 (L3) switches running Cisco IOS® System Software. Switches...
www.cisco.com/en/US/tech/tk389/tk689/technologies_configuration_example09186a0080094784.shtml
17 Nov 2007
This document examines what happens regarding the marking andclassification of a packet at different places during its journey within theCatalyst 6000 chassis. It mentions special cases,restrictions,and providesshort case studies.
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008014f8a8.shtml
16 Nov 2007
This document addresses frequently asked questions (FAQ) on the Quality of Service (QoS) feature of the Cisco Catalyst 4500/4000 (Supervisor Engine I and Supervisor Engine II) series, Catalyst 2948G, Catalyst 2980G, and Catalyst 4912G switches that...
www.cisco.com/en/US/products/hw/switches/ps663/products_qanda_item09186a0080094869.shtml
16 Nov 2007
|
|
|
|
