Search Results

1 - 10 of 9,660 results for Reducing Noise in Recorded Message on Cisco Unity 3.1.2 or 3.1.3
Sorted By:
 
This document describes techniques to troubleshoot problems that you might experience with Cisco Unity audio quality. Audio quality for the Cisco architecture for voice, video and integrated data (AVVID) solution is a perceptual measure of how good audio sounds as it reaches the...
www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a00801663a2.shtml
28 Feb 2008
...and in the UTIM (Unity Telephone Interface...system as well as the recording codec being used for new recordings in Unity. MsgStoreMonitor...monitor used for the message back end Unity is...subscriber homed on the local Unity box...distribution list is reduced, but not eliminated...configured. 4-41 Cisco Unified Communications...pages. In Unity 3.1(3) and later the...
www.cisco.com/en/US/docs/voice_ip_comm/uc_system/UC_Managed_Service/Unity_Managed_Services/UnityManagedServices702.pdf
09 Jun 2009 2055KB
...Skinny traces for the Cisco Unity server and Cisco CallManager traces...Chapter 9 Voice Messaging Issues Unity Issues...further information on configuring Skinny traces in Cisco Unity 3...Subscriber • Noise in Recorded Message on Cisco Unity 3.1.2 or 3.1.3 Unity Does Not...
www.cisco.com/en/US/docs/voice_ip_comm/cucm/trouble/5_0_2/tb502.pdf
2090KB
...VTP domain • Native VLAN Cisco Discovery Protocol Version 2...features than those available in version 1. One feature is an...error tracking, which helps to reduce network downtime. Errors reported...native VLAN IDs (IEEE 802.1Q) on connected ports and mismatched...states between connected devices. Messages about reported errors can be...console or to a logging server. Cisco IOS Cisco Discovery Protocol...
www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/12_2sx/nm_12_2sx_book.pdf
2811KB
...Configure the ports on Switch A to negotiate...the neighboring ports on Switch B are in EtherChannel auto mode. The system logging messages provide information...1 joined bridge port 3/1-2 %PAGP-5-PORTTOSTP...Switch B 1/1 1/2 3/1 3/2 Fast EtherChannel...
References: 5 TAC
www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/configuration/guide/6000_cfg.pdf
13672KB
...Optional) Specifies the size, in bytes, of the ICMP echo request...bytes. Note Because the interface is in loopback mode, the ping command...privileged EXEC mode. 8-24 Cisco 7600 Series Router SIP, SSC, and...loopback. The following is the output on the remote router: Router# configure...Router(config)# interface atm 3/1/2 Router(config)# loopback line...
www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76spasw.pdf
12632KB
...VNE support information chapters in this guide • Software Versions...1-3 • Expedite Legend, page 1-3 1-2 Cisco Active Network Abstraction 3.7... The Software Version column in the tables in this guide identifies...Cisco ANA and that can be running on the NEs that Cisco ANA supports. For...
www.cisco.com/en/US/docs/net_mgmt/active_network_abstraction/3.7.2/reference/guide/bkCiscoANAVersion372.pdf
14764KB
...VNE support information chapters in this Guide This section contains the...1-3 • Expedite Legend, page 1-3 1-2 Cisco Active Network Abstraction 3.7... The Software Version column in the tables in this Guide identifies...Cisco ANA and that can be running on the NEs that Cisco ANA supports. For...
www.cisco.com/en/US/docs/net_mgmt/active_network_abstraction/3.7.1/reference/guide/ANA371RefGuide.pdf
7867KB
...saving CPU cycles on both the Cisco ASA appliance and CS-MARS...translation data are combined in the same NSEL records, reducing the overall number of records exported compared to syslog. Cisco ASA appliances should take...CS-MARS as a NetFlow collector on the Cisco ASA appliance. There...some system status and other messages that are logged with syslog...
www.cisco.com/en/US/docs/solutions/Enterprise/Security/SAFE_RG/SAFE_rg.pdf
16710KB
...dspparts command as shown in the following example...1 65535 10000 10000 3 1 2 1000000 1000000 1000000...Step 3 To start ILMI on a port, enter the...partId> 3-65 Cisco MGX 8800/8900 Series...mix T1 and E1 signals in a single TUG-2...VC-12 No. 5-17 Cisco MGX 8800/8900 Series...53 3 7 2 22 2 1 1 54 3 1 2 23 2 2 1 55 3 2...7 3 29 2 1 2 61 3 1 3 30 2 2 2 62 3 2 3...provision connections on a particular service...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r5.4/configuration/guide/mgx54scg.pdf
7223KB