|
|
|
1 - 10 of
5,533 results for
Resetting Catalyst Switches to Factory Defaults
|
|
|
|
In certain situations, it is desirable to restore the Catalyst switch configuration to the original default factory settings. This is useful when you want to remove an undesirable configuration that is present in the switch. If you have configured...
References:
7
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800c4546.shtml
21 Dec 2005
This document provides the step-by-step procedure to reset the Cisco Catalyst Express 500 Series Switches to factory default settings.
References:
6
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/ps6545/products_tech_note09186a0080707fb0.shtml
13 Jun 2008
...button. This option resets the switch, deletes the current...configuration settings, returns to the factory default settings, and then restarts...approximately 10 seconds. This resets the switch, deletes the current...configuration settings, returns to the factory default settings, and then restarts...
www.cisco.com/en/US/docs/switches/lan/catalystexpress520/user/guide/trouble.html
27 Sep 2007
This document explains how to recover Cisco Catalyst fixed configuration switches from a corrupt or missing system image or an incorrectly set boot variable. The Catalyst fixed configuration switches that this document describes include the 2940, 2950/2955, 2970, 3550,...
References:
119
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
04 Jun 2007
This document helps troubleshoot potential hardware issues with the Catalyst 2948G-L3 and the Catalyst 4908G-L3 switches. Both the Catalyst 2948G-L3 and the Catalyst 4908G-L3 are wire-rate Layer 3 (L3) switches. Because both switches share the same architecture...
www.cisco.com/en/US/products/hw/switches/ps672/products_tech_note09186a0080094627.shtml
30 Aug 2005
...Configuration Files on Catalyst Switches 15/Oct/2009 Resetting Catalyst Switches to Factory Defaults 21/Dec/2005 Multicast...
www.cisco.com/en/US/products/hw/switches/ps628/prod_tech_notes_list.html
25 Apr 2005
...Enter. Catalyst 2960-S Switch Getting Started Guide 28 Catalyst 2960-S Switch Getting Started Guide OL-19793-02 Resetting the Switch Follow these steps to return your switch to the factory default settings. These are reasons...
www.cisco.com/en/US/docs/switches/lan/catalyst2960/hardware/quick/guide_stack/All_languages/2960S_gsg_en.pdf
29 Aug 2012
1950KB
Catalyst 3750-X and 3560-X Hardware...Diagnosing Problems •Resetting the Switch to the Factory Default Settings •Finding the...Failed Data Stack Member (Catalyst 3750-X Switches) The...
www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/hardware/installation/guide/HGTRBL.html
10 Aug 2007
This document describes how to work with configuration files and software images on these switches:
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfab.shtml
15 Oct 2009
This document describes the procedure for recovering an enable password or enable secret password for the WS-X4232-L3 Layer 3 (L3) services module for the Catalyst 4000. These passwords are used to protect access to privileged EXEC and configuration modes. The enable password can...
www.cisco.com/en/US/products/hw/switches/ps663/products_password_recovery09186a0080094785.shtml
10 Apr 2006
|
|
|
|
