|
|
|
1 - 10 of
28,961 results for
Route Selection in Cisco Routers
|
|
|
|
References:
3
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094823.shtml
02 Jan 2008
Border Gateway Protocol (BGP) routers typically receive multiple paths to the same destination. The BGP best path algorithm decides which is the best path to install in the IP routing table and to use for traffic forwarding.
References:
33
TAC
|
9
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml
21 May 2012
This document describes how to influence the route selection in Cisco routers by changing the Aadministravtive Distance value of the routing protocol.
www.cisco.com/en/US/tech/tk364/technologies_configuration_example09186a0080b8a51c.shtml
26 Jul 2011
Using a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution. While running a single routing protocol throughout your entire IP internetwork is desirable, multi-protocol routing...
References:
20
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml
22 Mar 2012
Load balancing is a standard functionality of the Cisco IOS® router software, and is available across all router platforms. It is inherent to the forwarding process in the router and is automatically activated if the routing table has multiple paths to a destination. It is based on standard...
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094820.shtml
10 Aug 2005
This document demonstrates the use of the bgp deterministic-med command and explains how it can effect multi-exit discriminator (MED)-based path selection.
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094934.shtml
23 Mar 2012
This document describes how to create a preferred route by influencing Enhanced Interior Gateway Routing Protocol (EIGRP) metrics. Given the topology shown in the network diagram, this document describes several ways to influence IP traffic from the clients to the servers so that the path...
References:
24
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800c2d96.shtml
10 Aug 2005
...user groups. When using the routers in conjunction with the Cisco Service Selection Gateway (SSG) and...The Cisco 7304 supports dual route processors and power supplies...s connectivity needs, the Cisco 7304 Series Routers deliver built-in Ethernet interfaces, while...
www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_brochure0900aecd8019dc1f.pdf
03 Dec 2011
9263KB
This document explains how a router that runs Open Shortest Path First (OSPF) selects a router ID, in what packets this value is sent, and how to troubleshoot router log messages that report duplicate IDs.
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080117102.shtml
24 Apr 2012
This chapter describes how to configure static routes on the Cisco Nexus 7000 series switches running Cisco NX-OS release 5.0(2) and later releases.
References:
5
TAC
www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_route.html
19 Jan 2011
|
|
|
|
