|
|
Recommended Content
Support Toolbox
|
1 - 10 of
75 results for
SLIPS on VWIC E1/T1 Controller in Access Gateway Module in Catalyst 4000
|
|
|
|
On platforms that use time-division multiplexing (TDM)-based architectures, there are multiple problems and symptoms that are related to the clocking modes to which Cisco IOS® software defaults.
References:
10
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008031a072.shtml
03 Aug 2006
...0.0/0 exists in the network. Workaround...removal (OIR) on a trunk card, a...MC3810 multiservice access concentrator with...affects the Cisco Catalyst 4000 voice/WAN gateway line card. There...CSCds74032 On a Cisco router...multiflex trunk module T1 line VWIC-xMFT-T1 or VWIC-xMFT-E1...vendor) caveat in the framer used...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122mcav4.html
24 Sep 2008
...0.0/0 exists in the network. ...removal (OIR) on a trunk card...MC3810 multiservice access concentrator with...affects the Cisco Catalyst 4000 voice/WAN gateway line card. There...12.2(3) On a Cisco router...multiflex trunk module T1 line VWIC-xMFT-T1 or VWIC-xMFT-E1...vendor) caveat in the framer used...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122mcav4.pdf
1568KB
...internal on an E1/T1 controller. Framing and cyclic...because of clock slips may be observed on E1/T1 interfaces if the...Recommendations for the Cisco Catalyst 4500 Access Gateway Module Image Name Software...c4gwy-io3s-mz is supported in Cisco IOS Release...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122feats.pdf
745KB
...specify the channel group number in the range of 0 to 4 defined with the channel-group controller configuration command...port-adapter Subinterface number in the range 1 to 4294967293...subinterface-number Creates an access interface for an IP subscriber...This command was implemented on the Cisco 4000 series routers. 11.0 The...3(4)T The analysis-module keyword was added. 12.3...Cisco 7600 series routers and Catalyst 6500 series switches. 12...
www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-cr-book.pdf
18812KB
...internal on an E1/T1 controller. Framing and...because of clock slips may be observed on E1/T1 interfaces if the...which is being used in the Access Gateway module hardware, has...specific to the Cisco Catalyst 5000 RSM/VIP2...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122feats.html
27 Apr 2007
...provide both digital and analog access to users on an enterprise network. The cards that reside in the Cisco AS5350 and AS5400...trunk cards, which provide an E1, T1, or T3 interface, and universal...AS5350 and AS5400 Universal Gateway Card Installation Guide ...The dial shelf acts as the access concentrator by accepting and...The dial shelf also contains controller cards voice feature cards...
www.cisco.com/en/US/docs/ios/voice/voiceport/configuration/guide/12_4t/vp_12_4t_book.pdf
932KB
... The 2T16S network processor module provides high-density serial interfaces for the Cisco 4000 series routers. This module has two high-speed interfaces...Asynchronous protocols include PPP, SLIP, and ARAP for dial-up connections...subinterfaces are configured for LAN access. interface Ethernet0 ip address...high-speed serial interfaces on the first 2T16S module. In this example, subinterfaces...
www.cisco.com/en/US/docs/ios-xml/ios/interface/configuration/12-4t/ir-12-4t-book.pdf
3661KB
...channels, belonging to controllers (T1 or E1) that do...Symptom occurs during PSTN Gateway (PGW) switchovers from...which can be accepted in a Cisco 7500 series router...following message is seen on the router console during...WAN Interface Cards (VWIC-2MFT-T1-DI or VWIC-2MFT-E1-DI...density voice network modules (NM-HDV) firmware...appear for a dial shelf controller on a Cisco AS5800 universal access server in the ENTITY-MIB...router (MSR), the Catalyst LS1010 switch, and the...correctly display clock slips when the router is operating...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122mcav3.html
24 Sep 2008
...channels, belonging to controllers (T1 or E1) that do not...Symptom occurs during PSTN Gateway (PGW) switchovers from...which can be accepted in a Cisco 7500 series router...following message is seen on the router console during...WAN Interface Cards (VWIC-2MFT-T1-DI or VWIC-2MFT-E1-DI...density voice network modules (NM-HDV) firmware...appear for a dial shelf controller on a Cisco AS5800 universal access server in the ENTITY-MIB...router (MSR), the Catalyst LS1010 switch, and the...correctly display clock slips when the router is operating...
www.cisco.com/en/US/docs/ios/12_2/release/notes/122mcav3.pdf
1087KB
|
|
|
|
