|
|
Recommended Content
Support Toolbox
|
1 - 10 of
5,764 results for
Sample Configuration Using the ip nat outside source static Command
|
|
|
|
This document provides a sample configuration with the use of the ip nat outside source static command and includes a brief description of what happens to the IP packet during the NAT process. Consider...
www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml
01 Jun 2006
This document provides a sample configuration with the ip nat outside source list command, and includes a brief description of what happens to the IP packet during the NAT process. You can use this command...
References:
5
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml
24 Jan 2006
In some situations, you may find it necessary to configure both static and dynamic Network Address Translation (NAT) commands on a Cisco router. This document explains how you can do this, and gives a sample scenario.
References:
7
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml
24 Jan 2006
This document explains configuring Network Address Translation (NAT) on a Cisco router for use in common network scenarios. The target audience of this document is first time NAT users.
References:
30
TAC
|
16
Support Community
-
View All
www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
16 Mar 2006
...process. To configure static SA address translation, use the following commands in global configuration mode: Command Purpose... Router(config)# ip nat outside source static global-ip local-ip...
www.cisco.com/en/US/docs/ios/12_2/ip/configuration/guide/1cfipadr.html
23 May 2005
...Network Address Translation (NAT) on a virtual interface without inside or outside specification, use the ip nat source command in global configuration mode. ip nat source...explicit id ) ip nat source static { esp local-ip interface...
References:
6
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/docs/ios-xml/ios/ipaddr/command/ipaddr-i4.html
29 Jul 2011
...nat outside source list Command Sample Configuration Using the ip nat outside source static Command Static NAT-PT for...
www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
This document provides a sample configuration for mapping one local IP address to two or more global IP addresses through policy-based static Network Address Translation (NAT) on the PIX/Adaptive Security Appliance (ASA) 7.x software.
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807d2874.shtml
30 Jan 2007
Cisco IOS® Network Address Translation (NAT) is designed for IP address simplification and conservation. It enables private IP internetworks that use nonregistered IP addresses to connect to the Internet. NAT operates on a Cisco router that connects two...
www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e51.shtml
09 Apr 2007
...marked whether they are on the inside or the outside. Only packets arriving...translation. Global Configuration Commands • Defining a pool ip nat pool <name> <start-ip...Defines a pool of addresses using start address, end address...translation of inside source addresses ip nat inside...name> [overload] | static <local-ip><global-ip...
References:
28
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/technologies/tk648/tk361/tk438/technologies_white_paper09186a0080091cb9.html
10 Aug 2004
|
|
|
|
