1 - 10 of
9,110 results for
Sample Configuration for Authentication in OSPF
This document shows sample configurations for Open Shortest Path First (OSPF) authentication which allows the flexibility to authenticate OSPF neighbors. You can enable authentication in OSPF in order to exchange routing update information...
23 Aug 2005
All areas in an Open Shortest Path First (OSPF) autonomous system must physically connect to the backbone area (area 0). However, in cases where this physical connection is not possible, you can use a virtual link to connect to the backbone through a nonbackbone area. You can also...
15 Aug 2005
This document shows sample configurations for authenticating the routing information exchange process for Routing Information Protocol version 2 (RIPv2).
10 Aug 2005
...Redistributing Routing Protocols Sample Configuration for Authentication in OSPF Sample Configuration for OSPFv3 Understanding...
09 Oct 2010
... Following is the sample configuration for the general network map shown in the figure above...255.255.0 router ospf 1 network 192.168...Configuration The basic configuration tasks in this example are as...Configure address ranges for Ethernet interface 0...interface 3. Enable OSPF on each interface. Set up an OSPF authentication password for each area...
01 Nov 2011
This configuration guide describes the configuration options available for OSPF running on Compatible Systems routers.
08 Dec 2004
This document provides a sample configuration for a VPN/IPsec with Open Shortest Path First (OSPF) on Cisco PIX Security Appliance Software Version 7.x or Cisco Adaptive Security Appliance (ASA). PIX/ASA 7.x allows OSPF unicast to run over an existing VPN connection....
14 Oct 2008
...Show the results of your OSPF configuration (optional): The following is sample output from the show ospf command: hostname(config...LSA 0 Number of areas in this router is 1. 1 normal...area is 1 Area has no authentication SPF algorithm executed...lists the release history for this feature. Table 21-1...
14 Nov 2008
...This example shows a basic OSPF configuration using the router ospf command to configure OSPF...VRF) instance processes for the VRFs first, second...the show ip ospf command in EXEC mode. show ip ospf...introduced. The following is sample output from the show ip ospf...Area has simple password authentication SPF algorithm executed...
16 Oct 2007
...Protocols 22/Mar/2012 Sample Configuration for Authentication in OSPF 23/Aug/2005 Sample Configuration for OSPFv3 ...
25 Apr 2005