|
|
|
1 - 10 of
62,258 results for
Setting Maximum Message Sizes
|
|
|
|
...listener. If you have multiple listeners, you need to make sure that you are set on the correct listener. For example, if you want to modify max.
tools.cisco.com/squish/ca4dF
09 Feb 2009
This document provides a sample configuration for Maximum Transmission Unit (MTU) sizes supported across all of the Cisco Catalyst-series switches on Ethernet-based ports.
www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml
24 Mar 2005
...Because of the way that the messages are stored on the Cisco Unity...included in the total mailbox size for each subscriber. •New...subscribers hear all active broadcast messages immediately after they enroll...Use the following task list to set up broadcast messaging: 1...Unity server to specify: –Maximum recording length of system broadcast...
www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/dom/5xcusag230d.html
15 Jun 2007
...fragment is malformed. The total size of the reassembled IP packet exceeds the maximum possible size of 65,535 bytes. Recommended...event may be in progress. If this message persists, contact the remote...ASA-4-209005: Discard IP fragment set with more than number elements...
References:
65
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html
02 Jun 2010
...reassembled IP packet exceeds the maximum possible size of 65,535 bytes. Recommended...may be in progress. If this message persists, contact the remote...ASA-4-209005: Discard IP fragment set with more than number elements...CoreErrAddr—Core error address (set by crypto chip) •Doorbell Size—Maximum crypto commands allowed •DoorBell...Recommended Action Forward the message information to the Cisco TAC...
References:
69
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/docs/security/asa/asa84/system/message/logmsgs.html
08 Mar 2010
...tunnelling requires system MTU size of [dec] to handle maximum size ethernet frames. Explanation This message means that the switch MTU setting might not be sufficient for...
www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_12c_ea1/system/message/msg_desc.html
30 Jun 2007
The purpose of this document is to present how IP Fragmentation andPath Maximum Transmission Unit Discovery (PMTUD) work and to discuss somescenarios involving the behavior of PMTUD when combined with differentcombinations of IP tunnels. The current widespread use of IP tunnels in theInternet...
References:
92
TAC
|
5
Support Community
-
View All
www.cisco.com/en/US/tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtml
14 Jan 2008
...reassembled IP packet exceeds the maximum possible size of 65,535 bytes. Recommended...may be in progress. If this message persists, contact the remote...ASA-4-209005: Discard IP fragment set with more than number elements...CoreErrAddr—Core error address (set by crypto chip) •Doorbell Size—Maximum crypto commands allowed •DoorBell...Recommended Action Forward the message information to the Cisco TAC...
References:
14
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/security/asa/asa83/system/message/logmsgs.html
08 Mar 2010
Increase the maximum message size for the mail flow policy The...mail flow policy, there is a maximum message size set to 5 MB.
tools.cisco.com/squish/Fd176
09 Jul 2010
... Note Do not make the buffer size too large because the switch...however, this value is the maximum available, and the buffer size should not be set to this amount. Step 3 logging host Log messages to a UNIX syslog server host...
www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swlog.html
05 May 2007
|
|
|
|
