|
|
|
1 - 10 of
44 results for
SimWriter Testing Dial Plan for the Cisco PGW 2200
|
|
|
|
While you create a dial plan and then test it out, there is no way to verify how a call runs through a dial plan on the Cisco PGW 2200. At this time, you need to make a test call and run a full MDL trace on the call. When you look at the...
www.cisco.com/en/US/products/hw/vcallcon/ps2152/products_tech_note09186a00801fe5dd.shtml
07 Jun 2005
This document provides a brief description of the routing capabilities provided by the PGW 2200 routing sub-system in call-control mode.
www.cisco.com/en/US/tech/tk652/tk653/technologies_white_paper09186a00801d8d94.shtml
04 Aug 2006
This document explains how Continuity Testing (COT) works for the Cisco PGW 2200 in configured signaling mode. COT is an automated diagnostic procedure performed in the Signaling System 7 (SS7) Public Switched Telephone Network (PSTN) between switches...
www.cisco.com/en/US/products/hw/vcallcon/ps2152/products_tech_note09186a00801ffb5a.shtml
02 Feb 2006
This document provides information for the disconnect cause value Bearer Capability not implemented on the Cisco PGW 2200. This document specifically applies to the Cisco SS7 Interconnect for Voice/Data Gateways Solution.
www.cisco.com/en/US/products/hw/vcallcon/ps2152/products_tech_note09186a0080229018.shtml
02 Feb 2006
...Feb/2006 PGW 2200 Softswitch...Feb/2006 SimWriter Testing Dial Plan for the Cisco PGW 2200 07/Jun...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/prod_configuration_examples_list.html
25 Apr 2005
...traditional TDM equipment. Support for domestic and international dialing plans Provides scalable and flexible service. Support for automatic number identification...prevents fraudulent use of the network. Support for toll-free...interconnect with full continuity test (COT) support Provides verification...Allows direct line access to the Cisco PGW 2200 Softswitch. Support for E-ISUP...
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn973.html
05 Jan 2012
...Troubleshooting Information for TAC Cases 20/Jan/2006 SimWriter Testing Dial Plan for the Cisco PGW 2200 07/Jun/2005 ...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/prod_tech_notes_list.html
25 Apr 2005
...Collection for Technical...2006 SimWriter Testing Dial Plan for the Cisco PGW 2200 07/Jun...
www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_maintain_and_operate_technotes_list.html
25 Apr 2005
...Collect Troubleshooting Information for TAC Cases 20/Jan/2006 SimWriter Testing Dial Plan for the Cisco PGW 2200 07/Jun/2005
www.cisco.com/en/US/products/hw/vcallcon/ps2027/tsd_products_support_design_technotes_list.html
25 Apr 2005
...You must configure a new dial plan result called CALL_TAG...configure to be present for the Pre-analysis, A-number...routing analysis. The Cisco PGW 2200 Softswitch processes the...using either the configured dial plan or domain based routing...not maintain any dialogs for these unsolicited NOTIFY, and deletes the context as soon as the final response reaches the Cisco PGW 2200 Softswitch. •Waits only...
References:
6
TAC
www.cisco.com/en/US/docs/voice_ip_comm/pgw/9/release/note/rn981.html
30 Jan 2013
|
|
|
|
