|
|
|
1 - 10 of
2,332 results for
TCP and UDP Ports Used by Cisco CallManager 3.3
|
|
|
|
This document provides a list of most of the TCP and UDP ports that aCisco CallManager 3.3 environment utilizes. This document provides importantinformation for when you configure both Quality of Service (QoS) andFirewall/VPN solutions on a network when there...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801a62b9.shtml
05 Mar 2008
...1) Cisco Unified Communications...New! TCP and UDP Port Usage Guide...1) Using Cisco Unified Communications...Media Engine TCP and UDP Port Usage, Release...Manager (CallManager) Dial Plan...Guide TCP and UDP Port...
References:
20
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
25 Apr 2005
...user-configurable on Cisco CallManager, Cisco IP...allocated by the CTIQBE...where TCP port 2748 is the...1.99 UDP port 1028...interface that is used by the CallManager...static TCP PAT from...When the Cisco IP Phones...you must use an access...server on UDP port 69. While...and Cisco CallManager, no access...transferred by TFTP during...1.33. TCP port 2000...
www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/inspect.html
04 May 2007
...DefaultAlarmWriter(port, alarmServiceHost...090T”, “Port is stuck”, “CTIPort01...parameter can be sent by specifying a ParameterList 2-191 Cisco JTAPI Developer Guide for Cisco CallManager 3.3(2) OL-3022-01...AlarmWriter to be used by this AlarmManager...AlarmService on a TCP link. This interface...
www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/3_3_2/developer/JTAPI332.pdf
06 Dec 2007
2660KB
...Cisco Unified CallManager then informs...gateway, using the MGCP User...Protocol (UDP) control...endpoints, and Cisco Unified CallManager...initially managed by the primary...H.225 tcp timeout...Cisco Unified CallManager and place...gatekeeper to tell Cisco Unified CallManager...calls received by the gateways...listen on TCP port 2720 instead...CallManager uses a randomly...in on the TCP port of...
www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42gatewy_ps556_TSD_Products_Implementation_Design_Guide_Chapter.html
18 Jul 2006
...Subscription with CallManager 3.0, 3.1...Mar/2008 TCP and UDP Ports Used by Cisco CallManager 3.3 05/Mar...
www.cisco.com/en/US/products/sw/voicesw/ps556/prod_tech_notes_list.html
25 Apr 2005
...Developer Guide for Cisco CallManager 3.3(3) Cisco JTAPI Implementation...new applications, use these interfaces...can be cached for use in different parts...DefaultAlarmWriter(port, alarmServiceHost...parameter can be sent by specifying a ParameterList...facility, com.cisco.services.alarm...AlarmService on a TCP link. This interface...
www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/3_3_3/developer/jt333ch2.html
18 Jul 2003
...Console: TCP and UDP Ports Used by Cisco CallManager 3.3 Cisco Unified...CallManager 6.0 TCP and UDP Port Usage...is between them, TCP traffic works correctly...
www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080772bb0.shtml
05 Mar 2008
...Subscription with CallManager 3.0, 3.1...Mar/2007 TCP and UDP Ports Used by Cisco CallManager 3.3 05/Mar...
www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_maintain_and_operate_technotes_list.html
25 Apr 2005
...Plans for Cisco CallManager Route Patterns...Jan/2006 TCP and UDP Ports Used by Cisco CallManager 3.3 05/Mar...
www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_design_technotes_list.html
25 Apr 2005
|
|
|
|
