|
|
|
1 - 10 of
57 results for
Terminating V.120 Sessions on the NextPort DSP
|
|
|
|
This document provides a sample configuration for access server dial-in IP/PPP with dedicated V.120 PPP
www.cisco.com/en/US/tech/tk713/tk507/technologies_configuration_example09186a0080094551.shtml
28 Sep 2004
...received on S&F onramp...SIP: DSP stops transmitting...caveats with NextPort Firmware...compatible between the Cisco AS5400...arriving after a session abort ...reported in the terminating link information...for Cisco NextPort SPE Firmware...chat script on dialout...7002 session abort due to DSP RAM access...
www.cisco.com/en/US/docs/routers/access/modem/portware/nextport/firmware/release/note/rnnp8x.html
07 Feb 2003
...Default 33600 S57 specifies the user rate (send and receive speed) for originating ISDN, V.110, V.120, and clear channel calls. The user rate is communicated to the...Transmit Level Setting)," on page 36.) These are the maximum transmit level settings in Cisco NextPort firmware: •United States...
www.cisco.com/en/US/docs/routers/access/modem/AT/Command/reference/atnextpt.html
06 Apr 2002
...There are no new features. See the "Caveats for Release 7.9...Initial 7.xx release. See the "Caveats for Release 7.5...3K), G.729a, G.729ab DSP Voice Features •G.168 echo...rates up to 38400 bps •Async V.120 at speeds of 64K and 56K for...Modulations •V.92 Modem on Hold and Quick Connect •V...and resolved caveats with Cisco NextPort Firmware and Cisco NextPort SPE...for messages arriving after a session abort •CSCdx03968—SREJ...
www.cisco.com/en/US/docs/routers/access/modem/portware/nextport/firmware/release/note/rnnp7xx.html
22 Apr 2002
...of 120 bytes per voice frame on a router that acts as a terminating node. The sample configuration begins in...T destination-pattern .T session target ras codec transparent...Commands Command Description codec (DSP interface dsp farm) Specifies...density and codec complexity based on the codec used. show dial peer...
www.cisco.com/en/US/docs/ios/voice/command/reference/vr_cr.pdf
19128KB
...Clear Channel) S57 specifies the user rate (send and receive speed) for originating ISDN, V.110, V.120, and clear channel calls. The user rate is communicated to the...Transmit Level Setting),” on page 36.) These are the maximum transmit level settings in Cisco NextPort firmware: • United States...
www.cisco.com/en/US/docs/routers/access/modem/AT/Command/reference/atnextpt.pdf
790KB
...commands 619 show mrcp client session active through show sip dhcp show mwi relay clients show nextport To display statistical information on NextPort digital signal processor (DSP) resources for diagnostic and debugging purposes, use the show nextport command in...commands 622 show mrcp client session active through show sip dhcp show nextport TDM Information: DSP is connected to TDM stream 0, channel 1 on the NextPort module Router...
www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr4/vcr4-cr-book.pdf
9551KB
...slot/port : 1/1 TTY# : 217 Session ID : 0x006D Module Address...Service Type : DATA FAX MODEM Session State : IDLE TDM Information: DSP is connected to TDM stream 0, channel 1 on the NextPort module Router# show nextport...
www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr4/vcr4-cr-book.epub
...Release 7.18.3. Refer to the Combined Release Notes for Cisco NextPort SPE Firmware Version 7.xy document on Cisco.com. Voice...GSMFR, and G.Clear DSP Voice Features • G...to 38400 bps • Async V.120 at speeds of 64K and 56K...EOP/MPS not received on S&F onramp call ...• CSCee34206—SIP: DSP stops transmitting RTP...and resolved caveats with NextPort Firmware and NextPort SPE...not compatible between the Cisco AS5400 and Cisco...messages arriving after a session abort • CSCeb53742...statistics is reported in the terminating link information Unresolved...
www.cisco.com/en/US/docs/routers/access/modem/portware/nextport/firmware/release/note/rnnp8x.pdf
377KB
...than 12 disables the reporting of all...1 V.92 Modem on Hold S-Registers...standard S29 NextPort 0x8013 12...reserved) 10 = V.120 11 = Clear...timeout S62 NextPort 0x803f 0 ...control of Modem on Hold can be configured...RADIUS servers use the vendor-specific...
www.cisco.com/en/US/docs/ios/dial/configuration/guide/dia_v92_hold_gatewy_external_docbase_0900e4b18060bbc6_4container_external_docbase_0900e4b182dbb176.html
05 Feb 2008
|
|
|
|
