|
|
Recommended Content
Support Toolbox
|
1 - 10 of
7,257 results for
Troubleshooting Input Drops on ATM Router Interfaces
|
|
|
|
All types of router interfaces,from serial to Ethernet to ATM,can report a large number of input drops in the output of the show interface atm command. The following sample output shows that a PA-A3 ATM port adapter has experienced 675 input...
www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800ac5a8.shtml
15 Nov 2007
This document provides the information you need to understand and troubleshoot output drops on ATM interfaces.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93dc.shtml
15 Nov 2007
This document explains how to troubleshoot high CPU utilization in a router due to the HyBridge Input process. ATM interfaces can support a large number of permanent virtual circuits (PVCs) configured to use request for comments (RFC) 1483 bridged-format protocol data...
www.cisco.com/en/US/tech/tk39/tk371/technologies_tech_note09186a0080093c91.shtml
05 Jun 2005
This document describes how ATM port adapters report traffic statistics and resolve issues with incorrect packet or byte counters displayed in the output of the show interface atm or show atm vc commands.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a0080094ba1.shtml
18 Dec 2007
Cisco offers three ATM port adapters for 7500 and 7200 series routers. The PA-A3 port adapter is designed for use on WAN links that need to implement traffic shaping to control bandwidth on the virtual circuits.
www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800d76fb.shtml
25 Aug 2006
This document is intended to help determine why a port or interface experiences problems. This document applies to Catalyst switches that run CatOS Software on the Supervisor or Cisco IOS® System Software on the Supervisor.
References:
113
TAC
|
6
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfd6.shtml
03 Apr 2009
This document provides tips on how to troubleshoot output drops that result from a priority queueing mechanism configuration on a router interface.
www.cisco.com/en/US/tech/tk39/tk51/technologies_tech_note09186a0080103e8a.shtml
15 Feb 2008
This document describes common symptoms and causes of high CPU utilization on Cisco routers, and provides troubleshooting guidelines and solutions.
www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a70f2.shtml
24 Jul 2008
This document explains how to troubleshoot why the output of the show interfaces command on a Cisco 12000 Series Internet Router displays an increasing number of ignored errors. It also provides troubleshooting tips for an increasing number of no mem drops in...
www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a0080094792.shtml
07 Jul 2005
This document can help you to determine the reasons behind cyclic redundancy check (CRC) errors on your ATM interface.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93ef.shtml
15 Nov 2007
|
|
|
|
