|
|
Recommended Content
Support Toolbox
|
1 - 10 of
1,656 results for
Troubleshooting Interface and VC Counter Issues on ATM Port Adapters
|
|
|
|
This document describes how ATM port adapters report traffic statistics and resolve issues with incorrect packet or byte counters displayed in the output of the show interface atm or show atm vc commands.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a0080094ba1.shtml
18 Dec 2007
Multiple processors residing on a dedicated system processor module as well as locally on interface hardware work together to ensure successful transmission and receipt of packets over ATM virtual circuits (VCs). These processors communicate among themselves by posting messages...
www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800d7780.shtml
15 Nov 2007
All types of router interfaces,from serial to Ethernet to ATM,can report a large number of input drops in the output of the show interface atm command. The following sample output shows that a PA-A3 ATM port adapter has experienced 675 input drops...
www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800ac5a8.shtml
15 Nov 2007
Cisco offers three ATM port adapters for 7500 and 7200 series routers. The PA-A3 port adapter is designed for use on WAN links that need to implement traffic shaping to control bandwidth on the virtual circuits.
www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800d76fb.shtml
25 Aug 2006
This document provides the information you need to understand and troubleshoot output drops on ATM interfaces.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93dc.shtml
15 Nov 2007
Maximum transmission unit (MTU) defines the largest size of packets that an interface can transmit without the need to fragment. IP packets larger than the MTU must go through IP fragmentation procedures.
www.cisco.com/en/US/tech/tk39/tk371/technologies_tech_note09186a00800c8279.shtml
14 Dec 2007
Newer router ATM hardware,including the PA-A3 port adapter,NM-1A-OC3/DS3,and Inverse Multiplexing for ATM (IMA) adapter,creates a separate packet queue for each virtual circuit (VC) in the interface hardware buffers. These buffers are also known as the...
www.cisco.com/en/US/tech/tk39/tk824/technologies_tech_note09186a0080094b48.shtml
14 Dec 2007
This document can help you to determine the reasons behind cyclic redundancy check (CRC) errors on your ATM interface.
References:
6
TAC
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93ef.shtml
15 Nov 2007
This document describes hardware troubleshooting procedures for the Catalyst 8540/8510 MSRs and LightStream 1010 ATM switches.
www.cisco.com/en/US/products/hw/switches/ps718/products_tech_note09186a0080094b6b.shtml
02 Nov 2005
Often is an important goal for network planners who need to determine if sufficient bandwidth was provisioned, as well as for service providers who need to provide accurate billing and accounting information to their customers, to be able to capture the utilization of an ATM permanent virtual...
www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080093c9a.shtml
26 Oct 2005
|
|
|
|
