|
|
|
1 - 10 of
80 results for
Trunk Load Allocation on IGX/BPX Switches
|
|
|
|
...programming value sent to the trunk card are not correct. Conditions...happens with an asymmetrical load. Workaround: None. CSCds18089...Conditions: Configuring APS on BPX with cnfapsln. Workaround...Signal Degrade. Conditions: Switch software release prior to 9...displayed. Switch Software Release IGX/BPX 9.1.19-9.1.22 ...copycons command from the T1-IMA trunk card to the UXM-T3 card which...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...y-red pair CSCdv44928 upport on UFMU card does not enforce 24M...CSCdv55819 Enhancement to display load units on user ports CSCdv55862 PROJ: Add SNMP Support for IGX/BPX Alarm Masking CSCdv57337 addjob...CSCdv59751 dsptrkutl on a feeder trunk doesnt showing any feeder connections...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...trunk protocol over a PXM port. On the BPX 8600 side the feeder connection trunk to the MGX 8850 is supported on the BXM card only. Interoperability...connections for stand-alone are local switching connections. None. A new...8230 functions as a feeder to the IGX, BPX or MGX 8850 switches, or can be used...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1127.html
03 Nov 2007
...utilization reports not based on WingZ. IGX, BPX, and MGX switches provide an Ethernet 802.3...LAN-based workstations access to the IGX, BPX, or MGX management interface...managed through a connection on a single WAN switch or through multiple interfaces...
www.cisco.com/en/US/docs/switches/wan/mgx/ses/software/ses_pnni_controller/r1.0.11/configuration/guide/overvw.html
02 Nov 2007
...secondary none is displayed. Switch Software Release IGX/BPX 9.1.19-9.1.22...command from the T1-IMA trunk card to the UXM-T3 card...status (no configuration on it) on IGX feeder node...cannot configure HCF shift on/off w/out deleting connections CSCdm30018 Trunk Cell routing restriction...Software Release Notes Cisco WAN Switching System Software OL-xxxxx-xx...Deliverables SNMP MIB The SNMP IGX/BPX switch SNMP MIB is being provided...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.pdf
1565KB
...select the node for downloading the switch software and firmware. Step...which you want to download the switch images. Step 6 Choose Tools...window lists the software that is loaded on the CWM in the /usr/users...This topic describes the Cisco IGX, BPX, and MGX node naming conventions...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/user/guide/usergd.pdf
2679KB
...select the node for downloading the switch software and firmware. Step...which you want to download the switch images. Step 6 Choose Tools...window lists the software that is loaded on the CWM in the /usr/users...This topic describes the Cisco IGX, BPX, and MGX node naming conventions...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.4.00/user/guide/usergd.pdf
2020KB
...where you want to download the switch software and firmware images...list of the software that is loaded on the CWM in the /usr/users...additional details pertaining to the switches, please refer to the appropriate...naming conventions for the Cisco IGX, BPX, and MGX nodes that are used...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.3.00_patch_1.0/user/guide/ug1530p1.pdf
3586KB
...CSCdv38587 Local and remote loopback on individual IMA links fail to...Software Release Notes Cisco WAN Switching System Software OL-xxxxx-xx...does not work when VSI is active on BXM CSCdv44412 Cannot configure...CSCdv55819 Enhancement to display load units on user ports CSCdv55862 PROJ: Add SNMP Support for IGX/BPX Alarm Masking CSCdv57337 addjob...CSCdv59751 dsptrkutl on a feeder trunk doesnt showing any feeder...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...Networks IGX, BPX, and MGX switches provide an Ethernet 802...through an Ethernet connection on a single WAN switch or through multiple Ethernet...workstations access to the IGX, BPX, or MGX management interface...firmware upgrades are performed by loading new code from either a CWM...network utilizing inter-nodal trunks. New code is loaded into...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/user/guide/Usergd.pdf
5930KB
|
|
|
|
