|
|
|
1 - 10 of
1,994 results for
Trunking Between a Catalyst 5000 and a Router over FDDI
|
|
|
|
Token Ring Inter-Switch Linking (TR-ISL) is a point-to-point protocol that works between two Cisco devices (switches or routers) that support Inter-Switch Linking (ISL) on their 100 Mb Fast Ethernet interfaces. TR-ISL Trunk ports enable connections between Catalyst...
www.cisco.com/en/US/products/hw/switches/ps593/products_tech_note09186a00800a75fa.shtml
09 Sep 2005
This document provides sample configurations for Fast EtherChannel (FEC), Inter-Switch Link (ISL), and 802.1Q trunking between a Catalyst 6500 switch that runs CatalystOS (CatOS) and a Cisco 7500 router. The results of each command are displayed as they are executed....
www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094b0a.shtml
01 Sep 2005
This document provides a sample configuration of IEEE 802.1Q (dot1q) trunking between a Cisco Catalyst 3550/3560/3750 switch that runs Cisco IOS® Software and a Catalyst 6500/6000 series switch or Catalyst 4500/4000 series switch that runs Cisco...
www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010f615.shtml
12 Dec 2006
This document provides sample configurations for InterSwitch Link (ISL) and 802.1q trunking between a Catalyst 6500/6000 switch that runs CatOS and a Cisco 7500 router that can do InterVLAN routing. The results of each command are displayed as they are executed....
www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a008014859e.shtml
01 Sep 2005
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically the Catalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that you are running Catalyst OS (CatOS) General...
References:
5
TAC
www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a0080094713.shtml
29 Nov 2007
...from the devices in a specific lab environment...document started with a cleared (default...represent either two Catalyst 5500/5000 switches that run...in VLAN 1 to flow between the switches without the need to configure trunking. References to...interfaces, as well as FDDI. VLAN 1 is also...VLAN 2 do not cross over the link between...
www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801429fb.shtml
07 Dec 2007
Each section of this document contains the system requirements in order to implement trunking on Catalyst series switches.
www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a008017f86a.shtml
10 Aug 2006
This document provides best practices for Catalyst 6500/6000 and 4500/4000 series switches that run Cisco IOS® Software on the Supervisor Engine.
References:
18
TAC
www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00801b49a4.shtml
03 Sep 2006
...on Catalyst 5500/5000 and 6500/6000 Family...07/Dec/2007 Trunking Between Catalyst 4500/4000, 5500/5000, and 6500/6000...2007 Configuring a Management IP Address...Protocol (VTP) Pruning Over LAN Emulation (LANE...Requirements to Implement FDDI 04/Oct/2005...
www.cisco.com/en/US/products/hw/switches/ps679/prod_tech_notes_list.html
25 Apr 2005
EtherChannel allows multiple physical Fast Ethernet or Gigabit Ethernet links to be combined into one logical channel. A logical channel allows load sharing of traffic among the links in the channel as well as redundancy in the event that one or more links in the channel fail. EtherChannel can...
www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a00800949c2.shtml
14 Aug 2006
|
|
|
|
