|
|
|
1 - 10 of
240 results for
UXM IMA Line Failure Errors
|
|
|
|
...with AAB fw Y-redundancy on UXM with IMATM trunks may fail with trunk errors. There are three manifestations...IMATM protocol will fail on an UXM configured for IMATM equipped...link is re-established. IMA failure also occurs without Y-Redundancy...of links-1 and make sure all lines are up. addtrk slot.startport...
www.cisco.com/en/US/ts/fn/000/fn747_08261998.html
05 Apr 2005
...This helps when statistical errors are occurring or when a trunk momentarily moves into a failure state then returns to normal...more of a disruption than the errors caused by the intermittent trunk...The Gateway Channel count for UXM cards. The value must not exceed... To display and configure IMA Trunk Configuration parameters...Index Identifies the card and line for the selected trunk. For...
www.cisco.com/en/US/products/sw/netmgtsw/ps2340/products_user_guide_chapter09186a00800e7741.html
02 Oct 2002
...CSCdm31518 "Active CC failure (EEPROM, SAR) and standby...BPX CSCdm48790 SIU phase errors from all BXM cards in a node...experienced failed CSCdp20486 UXM IMA physical line alarms are not sent to SV...VT CSCdp18160 False NNI failure indication at IGX FDR endpoint...TYPE) logged. CSCdp23410 UXM physical trunks with VPI...slot mapping CSCdp25420 A line which is upped can be configured as an IMA trunk CSCdp25685 Software error 1012 logged upon a delshelf...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...CSCdm31518 “Active CC failure (EEPROM, SAR) and standby...BPX CSCdm48790 SIU phase errors from all BXM cards in a...experienced failed CSCdp20486 UXM IMA physical line alarms are not sent to SV...VT CSCdp18160 False NNI failure indication at IGX FDR endpoint...TYPE) logged. CSCdp23410 UXM physical trunks with VPI...slot mapping CSCdp25420 A line which is upped can be configured as an IMA trunk CSCdp25685 Software error 1012 logged upon a delshelf...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.pdf
1565KB
...gives ICS related error msg with 56k addcon...framing config on FR T1 lines using 24 DS0s CSCec30644 IGX UXM IMA trunk not allocating...collected for IMA line/port CSCed41679...rebuild due to UP failure on active BCC card...OC-3 HCS Correctable Error count missing in SNMP...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...gives ICS related error msg with 56k addcon...framing config on FR T1 lines using 24 DS0s CSCec30644 IGX UXM IMA trunk not allocating...collected for IMA line/port CSCed41679...rebuild due to UP failure on active BCC card...OC-3 HCS Correctable Error count missing...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...increments during severely errored framing (SEF) or LOS failure events. Range: 0 to (2 32 –1) 179 Line BIP24 Err Secs — — Provides...least 2500 instances (for OC3 lines) of section BIP-8 errored seconds. The counter also increments during SEF and LOS failure events. Range: 0 to (2 32...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/database_interface/guide/dbase.pdf
11649KB
...with CRC-10 errors that are received from the line for an IMA group. Range...transmitted to the line for the IMA Group. Range...Transmission Failures No NA Number...cells. 56 HEC Errored cells received...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/database_interface/guide/dbase.pdf
10729KB
...bitmap. Bitmap showing which lines participate in the IMA Group on the local end. card...22 = NTC • 34 = AIT • 41 = UXM • 103 = BNI_T3 • 104 = BNI...also increments during severely errored framing (SEF) or LOS failure events. Range: 0 to (232 –1) 179 Line BIP24 Err Secs — — Provides a...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.0.00/database_interface/guide/dbase.pdf
10632KB
...the signal fault bit error rate (BER), in negative...back to the working line from the protection...cnfatmimagrp Configure ATM IMA Group—PXM1E The...Payload scrambling for an IMA group • Alarm indication...transmit direction after a line failure The default for...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.0/data/command/reference/mgxcr5.pdf
10004KB
|
|
|
|
