|
|
|
1 - 10 of
224 results for
UXM Path AIS Errors
|
|
|
|
...lineAlmTypePKCRC (HE alarmpacket CRC errors) lineAlmTypeOOM (OOM alarm) lineAlmTypeAIS (AIS alarm) lineAlmTypeLCV (Line...lineAlmTypeBCV (PLCP Bframe Parity Error code violations alarm) lineAlmTypeATMCRC...and configure Sonet Lines on a UXM card, select IGX: Line Config...VPI for the ILMI The virtual path identifier for the LMI protocol...
www.cisco.com/en/US/products/sw/netmgtsw/ps2340/products_user_guide_chapter09186a00800e7741.html
02 Oct 2002
...CSCeb21297 Symptom: Pseudo AIS on path BIP-8 errors on BXM cards with SONET interfaces...MFM, which puts the line into Path AIS as long as UAS-P condition...lines, especially when they are error prone, there is no choice but...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...CSCeb21297 Symptom: Pseudo AIS on path BIP-8 errors on BXM cards with SONET interfaces...MFM, which puts the line into Path AIS as long as UAS-P condition...lines, especially when they are error prone, there is no choice...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...seconds that have at least one path BIP-8 error. The counter also increments during detection of LOP and AIS events. Range: 0 to (232 –1) Stat ID UXM T3/E3/OC3 Physical Line...as at least 2400 instances of path BIP-8 errored seconds. The counter also increments during detection of LOP and AIS events. Range: 0 to (232 –1) Stat ID UXM T3/E3/OC3 Physical Line...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/database_interface/guide/stat_sum.pdf
4121KB
...seconds that have at least one path BIP-8 error. The counter also increments during detection of LOP and AIS events. Range: 0 to (232 –1) Stat ID UXM T3/E3/OC3 Physical Line...as at least 2400 instances of path BIP-8 errored seconds. The counter also...during detection of LOP and AIS events. Range: 0 to (232 –1) Stat ID UXM T3/E3/OC3 Physical Line...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/11.0.00/database_interface/guide/stat_sum.pdf
2460KB
...seconds that have at least one path BIP-8 error. The counter also increments during detection of LOP and AIS events. Range: 0 to (2 32...as at least 2400 instances of path BIP-8 errored seconds. The counter also increments during detection of LOP and AIS events. Range: 0 to (2 32...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/database_interface/guide/dbase.pdf
11649KB
...Seconds that have at least one path BIP-8 error. The counter also increments during detection of LOP and AIS events. Range: 0 to (232 –1) cells. 182 Path FEBE Err Secs — — Seconds that have...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/database_interface/guide/dbase.pdf
10729KB
...232 –1) cells. 171 OC3 Path AIS Path AISs. Range: 0 to (232 –1) cells. Stat ID UXM T3/E3/OC3 Physical Line Statistics...173 Section BIP8 Section BIP-8 errors. Range: 0 to (232 –1...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/database_interface/guide/3stats.pdf
2901KB
...Workaround: None. The software errors are benign, but they can fill...type of resetcd CSCdr25253 No AIS-P alarm reported when Path AIS is sent from upstream equipment...programmed with wrong values on BXM, UXM. CSCds18089 cnfapsln uses...CSCdr79123 During routing delay of path may be calculated incorrectly...deterministic CSCdr86188 AIS generates bit set for slave...configuration CSCdr91284 Two software errors 997s are logged after addtrk...first interface upped on BXM/UXM has an incorrect maximum discard...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...Workaround: None. The software errors are benign, but they can fill...2.37 CSCdr25253 No AIS-P alarm reported when Path AIS is sent from upstream equipment...programmed with wrong values on BXM, UXM. CSCds18089 cnfapsln uses...CSCdr79123 During routing delay of path may be calculated incorrectly...is deterministic CSCdr86188 AIS generates bit set for slave...configuration CSCdr91284 Two software errors 997s are logged after addtrk...first interface upped on BXM/UXM has an incorrect maximum discard...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.pdf
1565KB
|
|
|
|
