|
|
Recommended Content
Are you troubleshooting network problems?
|
1 - 10 of
62 results for
UXM VTRK Path Fail Errors
|
|
|
|
...configure Physical Lines on a UXM card, select IGX: Physical...Line Number of the line. Vtrk Virtual trunk number. Interface...and configure ATM trunks on a UXM card, select IGX: ATM Trunk...also must match the value for the path through the ATM cloud. This...before rerouting connections on a failed trunk. This helps when statistical errors are occurring or when a trunk...
www.cisco.com/en/US/products/sw/netmgtsw/ps2340/products_user_guide_chapter09186a00800e7741.html
02 Oct 2002
...feeder trunks as input and can cause errors or aborts CSCdv16980 Change dsptech...rather than failure return value for error CSCdv19842 Add description for...CSCdv27309 Adding a new prefer path should cancel the reroute timer...XLMI information CSCdv31936 Fail to add Master VP-Tunneling connection on IGX/UXM CSCdv34258 Graceful upgrade from...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.html
14 Apr 2008
...feeder trunks as input and can cause errors or aborts CSCdv16980 Change dsptech...rather than failure return value for error CSCdv19842 Add description...CSCdv27309 Adding a new prefer path should cancel the reroute timer...cleanup XLMI information CSCdv31936 Fail to add Master VP-Tunneling connection on IGX/UXM CSCdv34258 Graceful upgrade from...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9351rn.pdf
1935KB
...3.1V CSCdr78391 Software error 3074 when upgrading from 931T...CSCdr79123 During routing delay of path may be calculated incorrectly...the local slave end of a daxcon fails CSCdr83296 VSI partition...configuration CSCdr91284 Two software errors 997s are logged after addtrk <vtrk> CSCdr92045 Communication...first interface upped on BXM/UXM has an incorrect maximum discard...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.html
14 Apr 2008
...3.1V CSCdr78391 Software error 3074 when upgrading from 931T...CSCdr79123 During routing delay of path may be calculated incorrectly...the local slave end of a daxcon fails CSCdr83296 VSI partition addition...configuration CSCdr91284 Two software errors 997s are logged after addtrk <vtrk> CSCdr92045 Communication failure...first interface upped on BXM/UXM has an incorrect maximum discard...
www.cisco.com/en/US/docs/switches/wan/bpx/release/notes/9238rn.pdf
1565KB
...load available on the current path of this connection, in...returned: • –1 = internal errors • 0 = DAX connections • –2...master end of the connection is a UXM, BXM, or BME card. For ATM-FR... 1 = unknown 2 = clear 3 = fail svConnOAM LoopbackStatus 38...not routed on any alternative paths and is declared failed. If the connection is not...Service MIBs Connection Group Error Status Table The objects...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.0.00/user_snmp/guide/snmp.pdf
11471KB
...load available on the current path of this connection, in...returned: • –1 = internal errors • 0 = DAX connections • –2...master end of the connection is a UXM, BXM, or BME card. For ATM-FR... 1 = unknown 2 = clear 3 = fail svConnOAM LoopbackStatus 38...not routed on any alternative paths and is declared failed. If the connection is not...Service MIBs Connection Group Error Status Table The objects in...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.3.00/user_snmp/guide/snmp.pdf
11281KB
...load available on the current path of this connection, in...returned: • –1 = internal errors • 0 = DAX connections • –2...master end of the connection is a UXM, BXM, or BME card. For ATM-FR... 1 = unknown 2 = clear 3 = fail svConnOAM LoopbackStatus 38...not routed on any alternative paths and is declared failed. If the connection is not...Service MIBs Connection Group Error Status Table The objects...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.1.00/user_snmp/guide/snmp.pdf
11510KB
...available on the current connection path, in remote-to-local direction...returned: –1 = internal errors 0 = DAX connections –2 = PVC...master end of the connection is a UXM, BXM, or BME card. For ATM-FR...1 = unknown 2 = clear 3 = fail svConnOAM Loopback Status ...PXM1E) and PXM45) Virtual path index. Read-only. Range: 0...4095 = PXM1 For ASI, BXM, UXM, AXSM, AXSM-E, and PXM1E...1 = inactive, 2 = clear 3 = fail, 4 = down 200 = unknown atmEndPointRowStatus...destroy (not used and returns an error) atmEndPointType 10 ATM...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/16.0.00/user_snmp/guide/snmp.pdf
17862KB
...available on the current connection path, in remote-to-local direction...returned: • –1 = internal errors • 0 = DAX connections...master end of the connection is a UXM, BXM, or BME card. For ATM-FR... 1 = unknown 2 = clear 3 = fail svConnOAM Loopback Status 38...PXM1E) and PXM45) Virtual path index. Access: read-only...4095 = PXM1 For ASI, BXM, UXM, AXSM, AXSM-E, and PXM1E... 1 = inactive 2 = clear 3 = fail 4 = down 200 = unknown atmEndPoint...destroy (not used and returns an error) Table B-5 atmEndPointTable...
www.cisco.com/en/US/docs/net_mgmt/cisco_wan_manager/15.4.00/user_snmp/guide/snmp.pdf
9778KB
|
|
|
|
