|
|
|
1 - 10 of
466 results for
Understanding BITS Output on the Cisco ONS 15454
|
|
|
|
It is possible to use the building integrated timing supply (BITS) output reference to time a Cisco ONS 15454 node or another piece of equipment. However, when a BITS interface is enabled for this purpose, you receive a loss of signal (LOS) alarm on...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080124260.shtml
01 Jun 2006
This document describes Building Integrated Timing Supply (BITS) wiring information and presents a case for looped BITS timing configuration on Cisco ONS 15454.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a00804f265e.shtml
12 Jan 2006
...NO FEC, FEC, and E-FEC. The output bit rate is always 10.7092 Gbps as defined in ITU-T G.709, but the error coding performance can be provisioned...code Note The E-FEC of the ONS 15454 and Cisco ASR 9000 are not compatible...turned off, FEC can be turned on, or E-FEC can be turned on...
www.cisco.com/en/US/docs/optical/15000r9_0/dwdm/reference/guide/454d90_txpmxpcard.html
03 Jul 2012
There are several common issues that arise when you configure timing on the Cisco ONS 15454. This document explains these issues and provides an example of a timing best practice that you can use in a four-node ONS 15454 network. This document covers these...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080094027.shtml
31 Jan 2006
You encounter several common issues when you configure IP addresses and static routes you require on a network that runs ONS 15454 optical switches. This document uses a documented lab setup to guide you through a typical network configuration, and explains where these common issues...
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080094b1d.shtml
25 Jul 2007
This document describes how you can provision timing on ONS 15454 through Cisco Transport Controller (CTC). CTC provides two methods for you to provision timing and modify the settings:
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a0080482baf.shtml
02 Dec 2005
This document provides guidelines to plan the timing and synchronization on Cisco ONS 15454.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a008047faaf.shtml
02 Jan 2006
This document uses a simple test topology to describe how to troubleshoot Multi-Layer (ML) cards on Cisco ONS 15454. The Appendix section provides some basic configuration commands, and detailed topology information.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a00802dfccc.shtml
14 Nov 2005
...clock •Termination of two BITS inputs •Generation of two BITS outputs •Processing and generating...Synchronization Status Messages) The external timing input signal on the Cisco ONS 15454 must come from a synchronization...
www.cisco.com/en/US/docs/optical/15000r5_0/planning/guide/r50syspe.html
24 Nov 2009
This documentdescribes the procedure to configure EtherChannel and 802.1Q tunneling using a Cisco Catalyst 3500XL switch and the ML-Series card across the Resilient Packet Ring (RPR) in an Cisco ONS 15454 environment.
www.cisco.com/en/US/products/hw/optical/ps2006/products_tech_note09186a008065990b.shtml
10 Apr 2006
|
|
|
|
