|
|
|
1 - 10 of
4,333 results for
Understanding Packet Counters in show policy-map interface Output
|
|
|
|
This document explains how to interpret the show policy-map interface command output,which you can use to monitor the results of a service-policy created with Cisco modular Quality of Service (QoS) command-line interface (CLI) (MQC).
References:
8
TAC
www.cisco.com/en/US/tech/tk543/tk760/technologies_tech_note09186a0080108e2d.shtml
15 Feb 2008
Committed Access Rate (CAR) is a rate limiting feature that can be used to provide Classification and Policing services. CAR can be used to classify packets based on certain criteria, such as IP address and port values that use access-lists. The action for packets that conform to the rate...
www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008010dd6a.shtml
15 Feb 2008
The policing function determines if the traffic level is within thespecified profile or contract,and allows you to either drop out-of-profiletraffic or mark it down to a different Differential Services Code Point (DSCP)value. This enforces a contracted service level.
www.cisco.com/en/US/products/hw/switches/ps646/products_tech_note09186a00800feff5.shtml
15 Feb 2008
This document provides the information you need to understand and troubleshoot output drops on ATM interfaces.
www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93dc.shtml
15 Nov 2007
This document explains how to troubleshoot why the output of the show interfaces command on a Cisco 12000 Series Internet Router displays an increasing number of ignored errors. It also provides troubleshooting tips for an increasing number of no mem drops in the output...
References:
5
TAC
www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a0080094792.shtml
07 Jul 2005
This document explains how routing protocol messages,such as hellosand database descriptors,as well as other important control traffic are queuedwhen an outbound router interface is configured with a service-policy using thecommands of the modular quality of service command-line interface...
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094612.shtml
15 Feb 2008
This document provides tips on how to troubleshoot output drops that result from a priority queueing mechanism configuration on a router interface.
www.cisco.com/en/US/tech/tk39/tk51/technologies_tech_note09186a0080103e8a.shtml
15 Feb 2008
...Engine 720 display byte counters. The output does not display policed-counter information; 0 is displayed in its place (for example, 0 packets, 0 bytes). To display...information, enter the show mls qos command. For OSM WAN interfaces only, if you configure policing within a policy map, the hardware counters...
www.cisco.com/en/US/docs/ios/12_4t/12_4t4/ht_fpm.html
18 May 2005
As VPNs grow to include data, voice, and video traffic, the different types of traffic need to be handled differently in the network. Quality of service (QoS) and bandwidth management features allow a VPN to deliver high transmission quality for time-sensitive applications such as voice and video....
www.cisco.com/en/US/tech/tk543/tk757/technologies_tech_note09186a00800b3d15.shtml
24 May 2006
This document describes Quality of Service (QoS) for Voice over IP (VoIP) in a LAN environment by mapping Type of Service (ToS) to Class of Service (CoS) parameters.
www.cisco.com/en/US/tech/tk652/tk698/technologies_configuration_example09186a00800a954d.shtml
02 Feb 2006
|
|
|
|
