Register today for the best savings on Cisco Live, the premier annual event for IT professionals. This year’s show take place in Orlando, Florida beginning June 23, 2013.
1 - 10 of
4,140 results for
Understanding the Maximum Number of Active Virtual Circuits on Cisco ATM Router Interfaces
This document explains themaximumnumberofactivevirtualcircuits (VCs), the range ofvirtual path identifier (VPI) values, and the range ofvirtual channel identifier (VCI) values that Cisco's ATM...
Maximum transmission unit (MTU) defines the largest size of packets that an interface can transmit without the need to fragment. IP packets larger than the MTU must go through IP fragmentation procedures.
The Interim Local Management Interface (ILMI) is a protocol defined by theATM Forum for setting and capturing physical layer,ATM layer,virtual path,and virtualcircuit parameters onATMinterfaces. ILMI uses simple network...
This document describes how ATM port adapters report traffic statistics and resolve issues with incorrect packet or byte counters displayed in the output ofthe show interfaceatm or show atm vc commands.
A protocol generally is defined as the rules of communication between two devices. A signaling protocol defines the rules of communication between two ATMinterfaces that are using signaling messages to create on-demand or switched virtualcircuits...
This FAQ addresses IMA issues related to the 2600/3600 7x00 router series, Catalyst Multiservice Switch router (MSR) 8500 series, and Lightstream LS1010 Asynchronous Transfer Mode (ATM) switches.
Inverse Multiplexing over ATM (IMA) involves inverse multiplexing and de-multiplexing ofATM cells in a cyclical fashion among physical links grouped to form a higher-bandwidth and logical link. The rate ofthe logical link is approximately the sum of...
