Many hardware problems encountered during field installations or during normal operation can be prevented by a thorough product overview ahead of time. For Catalyst5000 series switches, this means being able to identify the switch chassis, Supervisor Engine and switching...
This document provides basic information on how to configure interVLAN routing on a Catalyst switch (running Catalyst OS [CatOS] system software) using an internal router (Layer 3 [L3] card/module). The term internal router refers to these L3 cards/modules on...
This document discusses the implementation of Cisco Catalyst series switches in your network, specifically theCatalyst 4500/4000, 5500/5000, and 6500/6000 platforms. Configurations and commands are discussed under the assumption that you are running...
This document discusses the setup of an EtherChannel between a Catalyst 5500/5000 switch running Catalyst OS (CatOS) and a Catalyst 6500/6000 or Catalyst 4500/4000 switch running Cisco IOS® Software. An EtherChannel bundles individual links...
The private User-Network Interface (UNI) defines a signaling protocol that runs between an end system like a router or Cisco Catalyst5000/6000ATMmodule and theATM switch to which the router interface is connected. The two UNI devices...
This document provides information on how to troubleshoot common issues on the Cisco Catalyst 6500/6000 Series Switches that run Catalyst OS (CatOS) system software (CatOS on the Supervisor Engine and Cisco IOS® Software on the Multilayer Switch...
The LS1010 and theCatalyst 8500 series use an internal switching fabric with a shared-memory architecture. In some cases, these switches discard cells and report these drops in the output of one of these commands, based on the platform:
...information, refer to the following publications...Safety Guide •Catalyst6000 Family Installation...Guide •Catalyst6000 Family Module Installation Guide •Catalyst6000 Family IOS Software Configuration Guide...Command Reference •ATMSoftware Configuration...Reference—Catalyst5000 Family and Catalyst...
This document explains the step-by-step procedure for upgrading thesoftware image on Catalyst5000/5500 series switches running CatOS on their supervisor module, and Cisco IOS on the Route Switch Module (RSM) / Route Switch Feature Card (RSFC)....
