|
|
|
1 - 10 of
1,303 results for
Using Core Dump Facilities on MGX Switches
|
|
|
|
...Reset because of PXM Low Voltage ON 00080 Reset By Event Log Task OFF...from a low-level debugging shell used by Cisco engineers ON 00200 Unknown OFF 00400 Reset from...example, resetcd) can cause a dump OFF 00800 Reset System (cannot...the resetsys command OFF 01000 Switch Core Card—the reset caused by the...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.0/data/command/reference/2b.html
03 Aug 2007
...control purposes, the MGX 8850 switch supports high and low-level user interfaces. You can use the Cisco WAN Manager application...For communicating with the MGX 8850 switch, the control port (SLIP... The downloadable firmware on each card determines the functionality...following new features: •core dump facility. •FRSM2T3 subrate to Kentrox...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1127.html
03 Nov 2007
...concentration to the BPX 8600. The MGX 8850 connects to the BPX 8600 using the feeder trunk protocol over a PXM port. On the BPX 8600 side the feeder connection trunk to the MGX 8850 is supported on the BXM...for stand-alone are local switching connections. This section...following new features: •core dump facility. •FRSM2T3 subrate to Kentrox...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1122.html
02 Nov 2007
...PXM-UI-S3 backcard was removed on standby, active PXM reset and...event log when CWM SCT manager is used to associate a card SCT to an...None CSCdv22540 Symptom: AXSM core dump Condition: Burn boot was executed...and dsplns command are executed on the AXSM. Workaround: None...ATM-ATM connection (SPVC), switch send mib object with Remote...Condition: When logging into the MGX from the login prompt. Workaround...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn2175.html
03 Nov 2007
...PXM-UI-S3 backcard was removed on standby, active PXM reset and...event log when CWM SCT manager is used to associate a card SCT to an...None CSCdv22540 Symptom: AXSM core dump Condition: Burn boot was executed...message indicating failure to switch due to unknown reason Condition: Rx cable on Protection line had been removed...Condition: When logging into the MGX from the login prompt. Workaround...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn2170.html
03 Nov 2007
...concentration to the BPX 8600. The MGX 8850 connects to the BPX 8600 using the feeder trunk protocol over a PXM port. On the BPX 8600 side the feeder connection trunk to the MGX 8850 is supported on the BXM...for stand-alone are local switching connections. This section...following new features: •core dump facility. •FRSM2T3 subrate to Kentrox...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1123.html
03 Nov 2007
...if there is no traffic passing on any connections, then PXM1E...this parity error and will not switch over to the standby card. Also...will reset. In future release of MGX Release 5, the Online Diagnostics...module will detect this condition on the Standby and cause the card...will result in an unconditional core dump on the card with reason "Reset...As a side effect, customers using the CLI command 'burnboot' to...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/40158x50.html
03 Nov 2007
...coredump caused by 2 tasks hanging on a semaphore CSCec11151 UI-S3...reference after inband references switch CSCec11356 LSNT:GLCNs downed...AXSMB CSCec13851 QMC errors on AXSM1P Etch5 cards CSCec14029...CSCec15230 Software Error Reset core dump on PXM45 node CSCec15803 Svc...rate CSCec16527 Changing maxbw using cnfpnportcac causes rsrc alloc...addressloadexcept CSCec29583 Interop of MGX 5.0 & 4.0 with PB & MPG enabled...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/40128x50.html
03 Nov 2007
...Monitoring periodically checks the switch resources and takes appropriate...following are modification on existing CLI: •dspcdalm...feature is supported on: •MGX 8850 (PXM1E, PXM45, AXSM...special loopback LCNs are used. The normal connection LCN...service module (SM) cards, core hot dump feature provides the functionality...SM core hot dump status by using the CLI command "core dump-status". The CLI shows...The feature is supported on: •MGX 8850 (AXSM/B, AXSM-E...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/40118x50.html
03 Nov 2007
...Monitoring periodically checks the switch resources and takes appropriate...following are modification on existing CLI: •dspcdalm...feature is supported on: •MGX 8850 (PXM1E, PXM45, AXSM...special loopback LCNs are used. The normal connection LCN...service module (SM) cards, core hot dump feature provides the functionality...SM core hot dump status by using the CLI command "core dump-status". The CLI shows...The feature is supported on: •MGX 8850 (AXSM/B, AXSM-E...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/40108x50.html
02 Nov 2007
|
|
|
|
