|
|
Recommended Content
Support Toolbox
|
1 - 10 of
18 results for
Using Test TCP (TTCP) to Test Throughput
|
|
|
|
You can use the Test TCP utility (TTCP) to measure TCP throughput through an IP path. To use it, start the receiver on one side of the path, then start the transmitter on the other side. The transmitting side sends a specified number of TCP...
www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094694.shtml
09 Sep 2005
...2005 Using service tcp-keepalives to Avoid...19/Nov/2007 Using Test TCP (TTCP) to Test Throughput 09/Sep/2005...
www.cisco.com/en/US/tech/tk801/tk36/tsd_technology_support_troubleshooting_technotes_list.html
25 Apr 2005
...Netperf Bandwidth test, which forces SDP to be used instead of TCP. The following example...Netperf Bandwidth test with SDP: host2...m 65536 TCP STREAM TEST from 0.0.0.0...port 0 AF_INET to 192.168.0.1...Size Size Size Time Throughput local remote local...
www.cisco.com/en/US/docs/server_nw_virtual/commercial_host_driver/host_driver_linux/user/guide/hdlnx.pdf
833KB
...as follows: Throughput is 7.12 gigabits...Netperf Latency test, forcing SDP to be used instead of TCP. After the test runs once, stop...
www.cisco.com/en/US/docs/server_nw_virtual/open_fabrics_enterprise_distribution/ofed_host_driver/release1.1/user/guide/hdugfull.pdf
1155KB
...that the use of rate limiting...the 14 T1s tested in this scenario...the potential to cause the Transmission...Protocol (TCP) window to...application throughput for those... • Hybrid Using CBWFQ and WRED...during each test to demonstrate...8-29: • TCP data throughput • Voice quality...
www.cisco.com/en/US/docs/routers/7200/design/ATM-traffic_management_guide/atmtrafc.pdf
2155KB
...connecting to devices that...starting with ttcp* serving...tcp server ttcp* *:22-25...revert to TCP to hosts...range] use both connect...Bandwidth test and the Latency...follows: Throughput is 7.12...Netperf Latency test, forcing SDP to be used instead of TCP. After...
www.cisco.com/en/US/docs/server_nw_virtual/open_fabrics_enterprise_distribution/ofed_host_driver/release1.1/user/guide/sdp.html
16 Feb 2008
...are as follows: Throughput is 6.60 gigabits...the Netperf Latency test, which forces SDP to be used instead of TCP. After the test runs once, stop the...
www.cisco.com/en/US/docs/server_nw_virtual/commercial_host_driver/host_driver_linux/user/guide/sdp.html
18 Jul 2007
...as follows: Throughput is 7.12 gigabits...Netperf Latency test, forcing SDP to be used instead of TCP. After the test runs once, stop...
www.cisco.com/en/US/docs/server_nw_virtual/open_fabrics_enterprise_distribution/ofed_host_driver/release1.1/user/guide/sdp.pdf
274KB
...Netperf Bandwidth test, which forces SDP to be used instead of TCP. The following...Netperf Bandwidth test with SDP: host2...m 65536 TCP STREAM TEST from 0.0.0.0...port 0 AF_INET to 192.168.0.1...Size Size Size Time Throughput local remote local...
www.cisco.com/en/US/docs/server_nw_virtual/commercial_host_driver/host_driver_linux/user/guide/sdp.pdf
121KB
...a result of testing the TCP state manipulation...bridge-group CLI being used which lead to arp pkts...TestFabricCh0Health test failure with...you downgrade to Rockies image...interesting traffic uses TCP ports CSCsl70148...resulting in low throughput CSCsl94488 Cisco...
References:
6
TAC
www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/caveats_SXH_rebuilds.html
25 Feb 2013
|
|
|
|
