|
|
|
1 - 5 of
5 results for
Using the Cisco 2524-2525 Back-to-Back
|
|
|
|
The Cisco 2524-2525 can be used in back-to-back configurations with the T1 CSU/DSU and the four-wire 56k CSU/DSU using a cross-over cable between the CSU/DSUs.
www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a3f09.shtml
09 Sep 2005
These configuration commands apply to the integrated DSU/CSU modules for the Cisco 2524-2525, the WIC-1DSU-56K4 (56/64 Kbps DSU/CSU WAN Interface Card), and the WIC-1DSU-T1 (T1 and fractional T1 DSU/CSU WAN Interface Card).
References:
8
TAC
www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a0080093c56.shtml
09 Sep 2005
When a serial line does not come up as it must, the best way to troubleshoot the circuit is to perform loopback tests. Loopback tests allow you to isolate pieces of the circuit, and test them separately. Begin loopback tests on the customer premises with channel service unit/data...
References:
70
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a754b.shtml
06 Mar 2008
...Routing and Bridging on a Router Using the IRB Feature 31/Aug/2009 Using the Cisco 2524-2525 Back-to-Back 09/Sep/2005
www.cisco.com/en/US/products/hw/routers/ps233/prod_tech_notes_list.html
25 Apr 2005
...Recognition and ACLs for Blocking the "Code Red" Worm 02/Aug/2006 Using the Cisco 2524-2525 Back-to-Back 09/Sep/2005
www.cisco.com/en/US/products/hw/routers/ps233/prod_configuration_examples_list.html
25 Apr 2005
|
|
|
|
