|
|
|
1 - 10 of
7,610 results for
Verifying NTP Status with the show ntp associations Command
|
|
|
|
This document explains how to use the show ntp associations command output to determine if NTP is working and communicating properly.
References:
7
TAC
www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_tech_note09186a008015bb3a.shtml
08 Nov 2004
... To display the status of Network Time Protocol (NTP) associations, use the show ntp associations command in user EXEC or privileged...synchronized peer. Command Description show ntp associations Displays the status of the NTP associations...
www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_14.html
20 Nov 2009
This chapter describes how to configure the Network Time Protocol (NTP) on Cisco Nexus 7000 Series switches.
References:
16
TAC
www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_3ntp.html
25 May 2010
This document provides a sample configuration for synchronizing the PIX/ASA Security Appliance clock with a network time server using Network Time Protocol (NTP). ASA1 communicates directly with the network time server.ASA2 passes NTP traffic through an IPSec...
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080a5641e.shtml
31 Jan 2012
This chapter describes how to configure the Network Time Protocol (NTP) on Cisco Nexus 7000 Series switches.
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_3ntp.html
24 Jul 2009
This document provides a sample configuration for synchronizing the PIX Firewall's clock with a network time server using Network Time Protocol (NTP). PIX 1 communicates directly with the network time server. PIX 2 passes NTP traffic through an IPSec tunnel to...
www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801d449c.shtml
19 Dec 2008
...to remove the ntp refclock command along with all the configured NTP options and how to disable...Router(config)# no ntp Command Description show ntp associations Displays the status of NTP associations configured...
References:
7
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_10.html
20 Nov 2009
...config)# no ntp Command Description show ntp associations Displays the status of NTP associations...synchronized peer. Command Description show ntp associations Displays the status of the NTP associations...
References:
8
TAC
|
3
Support Community
-
View All
www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf012.html
16 Oct 2007
Internet Protocol (IP) based networks are quickly evolving from the traditional best effort delivery model to a model where performance and reliability need to be quantified and, in many cases, guaranteed with Service Level Agreements (SLAs). The need for greater insight into network...
References:
16
TAC
|
2
Support Community
-
View All
www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a0080117070.shtml
17 Dec 2008
This document provides a sample configuration for synchronizing the ASA Security Appliance clock with a network time server using Network Time Protocol (NTP). ASA1 communicates directly with the network time server.ASA2 passes NTP traffic through an IPsec tunnel...
www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080babd00.shtml
30 Jan 2012
|
|
|
|
