|
|
|
1 - 10 of
346 results for
Why Does the show ip ospf neighbor Command Reveal Neighbors in the Init State
|
|
|
|
This document explains the possible causes and solutions for why the show ip ospf neighbor command reveals Open Shortest Path First (OSPF) neighbors in the init state.
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f11.shtml
10 Aug 2005
When OSPF adjacency is formed, a router goes through several state changes before it becomes fully adjacent with its neighbor. Those states are defined in the OSPF RFC 2328, section 10.1. The states are Down, Attempt, Init, 2-Way,...
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0e.shtml
10 Aug 2005
This document explains common problems with getting Open Shortest Path First (OSPF) neighbors to become fully adjacent. In a successful formation of OSPF adjacency, OSPF neighbors will attain the FULL neighbor state.
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094050.shtml
10 Aug 2005
OSPF states for adjacency formation are Down, Init, Attempt, 2-way, Exstart, Exchange, Loading and Full. There can be number of reasons why the Open Shortest Path First (OSPF) neighbors are stuck in exstart/exchange state. This document focuses...
References:
5
TAC
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0d.shtml
10 Aug 2005
This document shows sample configurations for Open Shortest Path First (OSPF) authentication which allows the flexibility to authenticate OSPF neighbors. You can enable authentication in OSPF in order to exchange routing update information in...
www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094069.shtml
23 Aug 2005
This document provides troubleshooting information for common problems with Open Shortest Path First (OSPF).
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800949f7.shtml
15 Sep 2008
...the Routing Table? Why Does the show ip ospf neighbor Command Reveal Neighbors in the Init State? Why Does the show ip ospf neighbor...
www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
...Sep/2008 Why Does the show ip ospf neighbor Command Reveal Neighbors in the Init State? 10/Aug/2005 Why Does the show ip...
www.cisco.com/en/US/tech/tk365/tsd_technology_support_troubleshooting_technotes_list.html
25 Apr 2005
...In the following example, the show environment all command displays system temperature...power supply conditions. (It does not display environmental information for SPAs.) The State column in show environment all output should...
References:
4
TAC
|
1
Support Community
-
View All
www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_s1.html
10 Apr 2010
...summary nsr command with the standby keyword...router# show bgp summary...BGP table state: Active...operating in STANDALONE...mode TCP Init Sync Done...13037 0 0 Neighbor Spk AS TblVer...describes the significant fields shown in the display...Description Field IP address of...interval State of the Nonstop...XR Routing Command Reference...
www.cisco.com/en/US/docs/routers/xr12000/software/xr12k_r3.9/routing/command/reference/b_rr39xr12kbook.pdf
11411KB
|
|
|
|
