|
|
|
1 - 10 of
9,299 results for
Why Doesnt OSPF Form Adjacency on a PRI, BRI, or Dialer Interface
|
|
|
|
...addition, we are using OSPF on this loopback, and the OSPF network type of this interface is loopback. OSPF advertises this address as a host route (with mask...
www.cisco.com/en/US/docs/ios/15_0sy/system/messages/15_sy_smg.pdf
15186KB
...1(3a)EC1. If a cell in this column...QoS Enhancements is a set of Cisco's...IP-precedence rate shaping on the downstream. ...non-facility-associated signaling 22 BRI = Basic Rate Interface 23 PRI = Primary Rate Interface...
www.cisco.com/en/US/docs/ios/12_2/12_2b/12_2bc/release/notes/u7208bc1.html
03 Nov 2005
...1(3a)EC1. If a cell in this...QoS Enhancements is a set of Cisco's...IP-precedence rate shaping on the downstream...non-facility-associated signaling 22. BRI = Basic Rate Interface 23. PRI = Primary Rate Interface...
www.cisco.com/en/US/docs/ios/12_2/12_2b/12_2bc/release/notes/u7208bc1.pdf
1865KB
This document describes how to configure a remote router (Cisco 3640) to dial the central site using an analog POTS line in the event that the Frame Relay connection goes down. The Cisco 3640 uses dialer profiles to provide the backup interface for the Frame Relay link. Also, a...
www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080094555.shtml
14 Sep 2005
This configuration demonstrates the use of an ISDN Basic Rate Interface (BRI) circuit to back up a leased line, WAN, or serial connection.
www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a008010456b.shtml
14 Sep 2005
...together dynamically on a per call basis, allowing...configuration. Each dialer interface uses a dialer pool, which is a pool of physical interfaces (ISDN BRI and PRI, asynchronous-modem...
www.cisco.com/en/US/tech/tk801/tk133/tk159/tsd_technology_support_sub-protocol_home.html
09 Oct 2010
Dial-on-Demand Routing (DDR) addresses the need for intermittent network connections over circuit-switched WANs. There are two main methods to configure DDR: legacy DDR and dialer profiles. This document addresses dialer profiles. For information on configuring legacy DDR,please...
www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080093c2e.shtml
05 Feb 2010
The service-policy command normally applies a policy map configured with the commands of the modular QoS CLI (MQC) to a main interface, subinterface, or virtual circuit. You can also apply this command to a virtual template interface, multilink interface, and...
www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094ad2.shtml
17 Jun 2009
This document provides a sample configuration for bridging two different sites over ISDN using one B channel per site using dialer profiles.
www.cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a008009457f.shtml
05 Feb 2010
This document provides tips for configuring and troubleshooting Dialer profiles.
www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a0080094e6c.shtml
15 Sep 2005
|
|
|
|
