|
|
|
1 - 10 of
4,409 results for
Why Frames and Bytes Are Discarded
|
|
|
|
The lists included in this document state reasons for frame discardsand the statistics affected. The numbers in parentheses are the StatisticsTypes. The * symbol denotes an internal statistic which is kept by the FrameRelay Port (FRP) and is not sent to the PCC.
www.cisco.com/en/US/products/sw/ps2346/ps99/products_tech_note09186a00801c8c69.shtml
17 Apr 2009
The dspchstats command displays of a set of statistics for a channel. These statistics indicate the number of frames successfully routed over the network and the number discarded on a specific connection (PVC).
www.cisco.com/en/US/products/hw/switches/ps988/products_tech_note09186a0080093cf9.shtml
04 Oct 2005
When Packet Input FIFO (PIF) overflows occur because of excessively high credit maximum (Cmax) settings on Cisco Internetwork Packet Exchange (IPX) and IGX platforms, isolation and diagnosis can be difficult. Trickling discards in conjunction with high Cmax settings and large port rates are...
www.cisco.com/en/US/products/hw/modules/ps3909/products_tech_note09186a0080093cf1.shtml
04 Oct 2005
...receiving device. BECN bits are set in frames that travel...and from packets that are discarded while in transit. Many...poor performance. Frame Relay traffic shaping...
www.cisco.com/en/US/tech/tk713/tk237/technologies_q_and_a_item09186a008009457a.shtml
17 Nov 2007
This document is intended to help determine why a port or interface experiences problems. This document applies to Catalyst switches that run CatOS Software on the Supervisor or Cisco IOS® System Software on the Supervisor.
References:
113
TAC
|
6
Support Community
-
View All
www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfd6.shtml
03 Apr 2009
...size, which is 1518 bytes (including Layer 2...The definition of frame size is vendor-dependent, as these are not part of the IEEE...switch declares big frames as oversize and discards them. In order...Here are the reasons why the MTU size of certain...
www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml
24 Mar 2005
...queue is full will be discarded. Dynamic queue...queue size Size in bytes of each output queue...drops Number of frames dropped by all output...NNI PVC STATUS fields are displayed only for PVCs configured on Frame Relay NNI interface...
www.cisco.com/en/US/docs/ios/12_2/wan/command/reference/wrffr4.html
16 Oct 2007
This document provides common IGX configuration scenarios that are typically found in real working networks. The majority of these labs are simple,yet effective,in demonstrating the abilities of the multiservice IGX switch.
www.cisco.com/en/US/products/hw/switches/ps988/products_configuration_example09186a00801c1211.shtml
30 Apr 2009
...replacement products are available Information...Frame Lengths of 6 Bytes or Less Field Notice...1000003) Frame Discards IPX Network Trunk...Optimizing SNA Traffic in a Frame Relay Network Software... Trickling Egress Frame Discards and PIF Overflows...FastPAD, and VNS Why Frames and Bytes Are...
www.cisco.com/en/US/products/ps6325/tsd_products_support_eol_model_home.html
12 Sep 2012
...bytes exceeds maximum size = bytes: src = source_address, dest...maximum possible size of 65,535 bytes. Recommended Action A possible...Error Message %ASA-4-209005: Discard IP fragment set with more than...elements: src = Too many elements are in a fragment set. Explanation...
www.cisco.com/en/US/docs/security/asa/asa81/system/message/81logmsg.html
13 Aug 2007
|
|
|
|
