|
|
|
|
|
1 - 10 of
13 results for
Why Hardware Revisions are Irrelevant when Requesting an RMA for IGX and BPX Cards
|
|
|
|
...lower back cards are installed are also...switch, each slot has an upper and a lower bay for back cards. If...Cisco MGX 8800/8900 Hardware Installation Guide...MGX 8950. PXM45 cards do not provide ATM...communication on the AXSM card. Table 3-1 PXM1E...and torn down upon request from CPE. SPVCs2...ATM network core. BPX PNNI trunks BPX PNNI...switch supports PNNI when connected to the...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.5/data/8850/configuration/5510/mgx5scg.pdf
7336KB
...lower back cards are installed are also...switch, each slot has an upper and a lower bay for back cards. If...Cisco MGX 8800/8900 Hardware Installation Guide...MGX 8950. PXM45 cards do not provide ATM...communication on the AXSM card. Table 3-1 PXM1E...and torn down upon request from CPE. SPVCs2...ATM network core. BPX PNNI trunks BPX PNNI...switch supports PNNI when connected to the...
www.cisco.com/en/US/docs/switches/wan/mgx/software/mgx_r5.5/data/8850/configuration/guide/mgx5scg.pdf
7334KB
...lower back cards are installed are also...switch, each slot has an upper and a lower bay for back cards. If any...Cisco MGX 8800/8900 Hardware Installation Guide...MGX 8950. PXM45 cards do not provide ATM...communication on the AXSM card. Table 3-1...and torn down upon request from CPE. SPVCs2...ATM network core. BPX PNNI trunks BPX PNNI...switch supports PNNI when connected to the...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r5.4/configuration/guide/mgx54scg.pdf
7223KB
...in this document are not intended to...in the document are shown for illustrative purposes...OL-6482-01, Revision C0, June 2006...Submitting a Service Request xlvi Definitions...Guidelines for Creating an IP Address Plan... Verifying the Hardware Configuration 2-44...Quickstart 3-9 BPX PNNI Trunk Configuration...Quickstart 3-17 Cisco IGX Feeder to MGX 8830...Configuring the Card Mode 3-21 Setting...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/mgx_r5.2/data/configuration/guide/fbmgx5scg.pdf
7068KB
...and "-ar" options are not displayed as available...update Database. For FSRM(4T, 4E, 8T...AUSM, VISM, CESM cards we are not getting...Upload files for all cards, so that CWM can...command. So this is why you can not change...assigned by PXM. 0 is an invalid number, this...another PXM via a BPX. When you do dspconn, ABIT...applied upon an external request such as "Manual Switch...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1125.html
02 Nov 2007
...and rpmChanMidHigh are referred as message ID for PVC connections. They are read only numbers and...command. So this is why you can not change...assigned by PXM. 0 is an invalid number, this...to another PXM via a BPX. When you do dspconn, ABIT...where the AUSM-8 card reset on its own mostly...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1131.pdf
1304KB
...4.1] requests activation...configures an interface...controller for a specified...interface card number...The numbers are assigned at...installation or when added to a...appropriate hardware manual for...repaired. RMA Number Return...which is an administrative...be returned for repair. Board Revision Revision number...SPA Carrier Card Line Card...contents at hardware discovery...
www.cisco.com/en/US/docs/ios/12_2/interface/command/reference/irf_bk.pdf
4842KB
...and "-ar" options are not displayed as available...update Database. For FSRM(4T, 4E, 8T...AUSM, VISM, CESM cards we are not getting...Upload files for all cards, so that CWM can...command. So this is why you can not change...assigned by PXM. 0 is an invalid number, this...another PXM via a BPX. When you do dspconn, ABIT...applied upon an external request such as "Manual Switch...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1127.html
03 Nov 2007
...as following: SES for SES-IGX product MGX 8230 for MGX 8230 or MGX 8830...1022. Condition: When the FRF.5 NIW Interworking...CSCds05006 Symptom: If an SRM line with loopback...and "-ar" options are not displayed as available...addconn command. This is why you ca not change its...to another PXM via a BPX. When you do dspconn...where the AUSM-8 card reset on its own mostly...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1132.html
03 Nov 2007
...and rpmChanMidHigh are referred as message ID for PVC connections. They are read only numbers and...command. So this is why you can not change...assigned by PXM. 0 is an invalid number, this...to another PXM via a BPX. When you do dspconn, ABIT...where the AUSM-8 card reset on its own mostly...
www.cisco.com/en/US/docs/switches/wan/mgx/mgx_8850/software/release/notes/rn1131.html
02 Nov 2007
|
|
|
|
|
